Mafell KSS 80 Ec 370 Manuale
Manuale PDF · 114 Pagine
Italiano

Controllo rapido
Risposta errata, riprova.
Chatta con il manuale del tuo Mafell KSS 80 Ec 370 utilizzando l'IA
Ottieni risposte istantanee dall'IA dal manuale del tuo Mafell KSS 80 Ec 370
Chiedi qualsiasi cosa sul Mafell KSS 80 Ec 370. Le risposte provengono da questo manuale, con le pagine di riferimento.
KSS 80 Ec 370 Programma di manutenzione
Consegnare la macchina a un centro assistenza clienti MAFELL autorizzato per l'ispezione dopo un lungo periodo di funzionamento.
Assicurarsi che la protezione inferiore si chiuda correttamente e si muova liberamente; non utilizzare se rimane bloccata o è danneggiata.
La pulizia regolare della macchina, in particolare dei dispositivi di regolazione e delle guide, è un importante fattore di sicurezza.
Fai una Domanda
Consigli KSS 80 Ec 370?
Sì NoDomande frequenti
The saw uses 237 mm diameter carbide-tipped blades with a 30 mm bore. Recommended tooth counts: 12T for rip, 24T for general rip/cross cuts, and 56T for fine cross cuts. Use only blades rated for the saw’s idle speed and EN 847-1 compliant.
Questa risposta è utile?
Cutting depth is continuously adjustable up to 88 mm (varies with tilt). The saw unit tilts from 0° to 60° for bevel cuts. For the KSS80Ec 370 in cross-cut configuration, effective cutting depths are slightly reduced (e.g., 82/69/55/38 mm at 0°/30°/45°/60°).
Questa risposta è utile?
Yes: harmful dusts must be extracted with an M-class extractor for prolonged work. The saw’s extraction port diameter is 35 mm and requires an external extractor capable of at least 20 m/s air velocity for effective removal.
Questa risposta è utile?
The saw includes a riving knife/splitter, upper fixed and lower retractable guards, a large base plate, handles for two-handed control, electronic motor management with overload protection, and an automatic brake. Proper blade choice, secure work support and using the riving knife (except for plunge cuts) also reduce kickback risk.
Questa risposta è utile?
The KSS80Ec 370 uses a 2300 W universal motor (available for other voltages in some regions). Built-in electronics ensure smooth acceleration, regulate speed under load, and reduce motor output on overload; an automatic brake limits blade coast time to about five seconds.
Questa risposta è utile?
Yes. The saw handles panel materials like chipboard and MDF when using appropriate blades. Mafell offers guide rails (F80–F310) and accessories to enable accurate guided and long cuts; specialized guide and rail kits increase precision and convenience.
Questa risposta è utile?
Keep adjustment mechanisms and guides clean of debris, inspect the lower guard and spring, replace worn blades and brushes as needed, and use Mafell-specified grease for lubrication points. For long-term service, have the machine inspected at an authorized Mafell service workshop.
Questa risposta è utile?
Vantaggi e Svantaggi
Vantaggi
- High power 2300 W motor with stepless speed control (2250–4400 rpm) for versatile cutting.
- Comprehensive safety set: upper/lower guards, riving knife, brake and robust base plate.
- Precise plunge and bevel capability (0°–60°) with adjustable cutting depth up to 88 mm.
- Compatible with Mafell guide rails and accessories for long, accurate guided cuts.
- Solid build and low-maintenance design with lifetime-lubricated bearings.
Svantaggi
- High noise emission (LPA 91 dB(A), LWA 102 dB(A)) requires hearing protection.
- Weight increases significantly with guiding device (up to ~8.3 kg), affecting portability.
- Requires correct blade selection and maintenance; improper blades risk kickback or damage.
- Dust extraction mandatory for health; needs M-class extractor for heavy dust loads.
- Replacement parts and specialized grease recommended from manufacturer to retain warranty.
Prodotto Specifiche
Tipo
Sega circolare
Potenza
2300W
Velocita' a vuoto
2250-4400/min
Diametro lama della sega
237mm
Capacita' di taglio
82mm (profondita' di taglio a 0 gradi), 55,5mm (profondita' di taglio con inclinazione di 45 gradi)
Inclinazione lama
0-60 gradi
Portautensile
Foro 30mm
Caratteristiche speciali
Controllo velocita', Guida parallela, Estrazione polvere, Protezione da sovraccarico, Funzione di inclinazione
Peso
8,30kg
Descrizione del prodotto Descrizione
Mafell KSS80Ec 370 Electric Hand Circular Saw — Powerful Precision for Professionals
The Mafell KSS80Ec 370 Electric Hand Circular Saw is a robust, professional-grade portable circular saw and cross-cutting system engineered for demanding woodworking tasks. With a 2,300 W universal motor and stepless speed control from 2,250 to 4,400 rpm, it delivers consistent cutting performance across hardwood, softwood and engineered panels. The KSS80Ec 370 variant adds a guiding assembly to expand cutting length (370 mm at 80 mm workpiece thickness) and enhance accuracy for rip and cross cuts.
Designed for tradespeople and serious hobbyists, the saw emphasizes safety and usability. It includes upper and retractable lower guards, a riving knife/splitter, a built-in brake, and a large base plate for stability. The electronic motor management ensures smooth acceleration and overload protection; an automatic brake reduces blade coast time to about five seconds. The machine accepts 237 mm carbide-tipped blades (30 mm bore) and ships with a 12-tooth blade, riving knife, parallel guide and service tool depending on model configuration.
Versatility is a core strength: plunge cuts, bevel cuts from 0°–60°, and adjustable cutting depths up to 88 mm (varying with tilt) are supported. The saw’s bevel and depth scales, plunge-latch mechanism and adjustable riving knife make repetitive and precise operations straightforward. Dust management is addressed with a 35 mm extraction port; users are advised to connect an M-class extractor for health protection during heavy dust generation.
Technical highlights include clear specifications for cutting depths and blade sizes, robust safety devices, and optional guide rails (F80–F310) and accessories to expand capability. The manual provides step-by-step procedures for blade changes, setting the riving knife, using the parallel or roller edge guides, and troubleshooting common faults. Emission data (LPA 91 dB(A), LWA 102 dB(A)) and vibration (<2.5 m/s2) are stated, so users can plan PPE and jobsite measures accordingly.
With careful adherence to safety instructions (use of hearing and dust protection, correct blade selection, secure clamping of workpieces), the KSS80Ec 370 offers controlled, accurate cuts and dependable durability in professional environments.
Notes
- Use only approved blades (EN 847-1) with correct bore and dimensions; avoid damaged or HSS blades.
- Always connect adequate dust extraction (air velocity ≥ 20 m/s) for prolonged work.
- Regularly clean adjustments and guides; use original Mafell spare parts and grease as specified.
Cerca di 67.706 Manuali online
Digita il marchio o il modello