Manual.ly Logo

Beha-Amprobe NCV-1020-EUR VOLTfix Manuale

0,0 · 0 Valutazioni

Manuale PDF · 140 Pagine

Italiano

M: QW-35-FL
pagina

/ 140

Loading...
a7b010e326c02f81a952c42bd3bd4f18af37 page 9
2
SAFETY INFORMATION
 Warning
To prevent possible electrical shock, re, or
personal injury:
• If the Voltage Probe is used in a manner not
specied by the manufacturer, protection
provided by the Voltage Probe may be affected.
• Test on a known live source within the rated
AC voltage range of the product both before
and after use to ensure the Voltage Probe is in
good working condition.
• When using the Voltage Probe, voltage may
be present even if the tip does not glow. The
Voltage Probe indicates active voltage in the
presence of electrostatic elds of sufcient
strength generated from the source voltage.
If the eld strength is low, the Voltage Probe
may not provide indication of live voltage.
Lack of an indication occurs if the Voltage
Probe is unable to sense the presence of
voltage which may be inuenced by several
factors including, but not limited to:
- Position of the earth conductors in the
environment under test
- Shielded wire/cables
- Thickness and type of insulation
- Distance from the voltage source
- Fully-isolated users that prevent an
effective ground
- Receptacles in recessed sockets / differences
in socket design
- Condition of the Voltage Probe and batteries
• The Voltage probe is not the appropriate tool
to check for the absence of voltage. Use a
voltage tester therefore.
• Do not use the Voltage Probe if it appears
damaged or is not operating properly. Closely
examine the probe tip for cracks or breakage
before use. If in doubt, have the Voltage
Probe serviced.
• Do not apply more than the rated voltage as
marked on the Voltage Probe.
• When operating the Voltage Probe, keep
ngers behind the nger guard.
• Do not use the Voltage Probe if it is not
ashing upon power on.
• Use caution with voltages above 30 V AC as a
shock hazard may exist.
• Comply with local and national safety requirements.
• Use proper protective equipment as
recommended or required by local or national
authorities.

Chatta con il manuale del tuo Beha-Amprobe NCV-1020-EUR VOLTfix utilizzando l'IA

Ottieni risposte istantanee dall'IA dal manuale del tuo Beha-Amprobe NCV-1020-EUR VOLTfix

Chiedi qualsiasi cosa sul Beha-Amprobe NCV-1020-EUR VOLTfix. Le risposte provengono da questo manuale, con le pagine di riferimento.

NCV-1020-EUR VOLTfix Programma di manutenzione

Prima e dopo l'uso
Test su fonte di tensione nota

Verificare il funzionamento della sonda testandola su una fonte di tensione nota entro la tensione nominale prima e dopo ogni utilizzo.

Mostra nel manuale (pagina 9)
Prima dell'uso
Ispezionare la punta della sonda per danni

Esaminare attentamente la punta della sonda per crepe o rotture. Non utilizzare se danneggiata o se non lampeggia all'accensione.

Mostra nel manuale (pagina 9)
Secondo necessità
Sostituire le batterie

Sostituire con due batterie alcaline AAA da 1,5 V quando il LED non appare all'accensione (modello NCV-1020-EUR).

Mostra nel manuale (pagina 14)
Durante lo stoccaggio a lungo termine
Rimuovere le batterie

Se la Sonda di Tensione non verrà utilizzata per un lungo periodo, rimuovere le batterie per prevenire perdite.

Mostra nel manuale (pagina 14)
Secondo necessità
Pulire la Sonda di Tensione

Pulire con acqua saponata delicata utilizzando un panno morbido. Lasciare asciugare completamente. Non usare idrocarburi aromatici o benzina.

Mostra nel manuale (pagina 15)
M: qwen/qwen3.8-flash

Fai una Domanda

0/1000

Consigli NCV-1020-EUR VOLTfix?

Sì No

Domande frequenti

A

Press the ON/OFF button momentarily to activate the default voltage range. Press it again to switch to high sensitivity range. Hold for more than two seconds to turn it off.

Questa risposta è utile?

A

It is rated CAT IV 1000 V for use at the source of low voltage installations and meets IEC and UL safety standards.

Questa risposta è utile?

A

Pull the battery cap upwards and off. Insert two 1.5 V AAA alkaline batteries observing polarity marked on the side. Push the cap back on tightly.

Questa risposta è utile?

A

No, this device is designed specifically for detecting AC voltage and will not provide indication for DC sources.

Questa risposta è utile?

A

The product is covered by a one year limited warranty from the date of purchase regarding material and workmanship defects.

Questa risposta è utile?

A

Yes, it has an IP65 rating which makes it resistant to water from low pressure jets and dust ingress for indoor and outdoor use.

Questa risposta è utile?

A

The standard NCV-1020-EUR VOLTfix model does not detect magnetic fields. The NCV-1040-EUR MAGNO-VOLTfix model includes this feature.

Questa risposta è utile?

M: QW-35-FL

Vantaggi e Svantaggi

Vantaggi

  • CAT IV 1000 V safety rating ensures highest level electric protection.
  • IP65 water and dust resistance allows use in harsh outdoor environments.
  • Dual range detection supports both high and low voltage AC systems.
  • Audible and visual alerts provide clear feedback during testing procedures.
VS

Svantaggi

  • Does not verify absence of voltage so secondary testing is required.
  • Battery life is limited by the auto power off feature timing.
  • Cannot detect magnetic fields as the higher MAGNO models can.
M: QW-35-FL

Prodotto Specifiche

Intervallo di misura

50-1.000 V

M: QW-35-FL

Descrizione del prodotto Descrizione

Beha-Amprobe NCV-1020-EUR VOLTfix Review

The Beha-Amprobe NCV-1020-EUR VOLTfix Non-contact Voltage Tester stands as a premier tool for electrical professionals. It offers non-contact voltage detection up to 1000 volts AC without breaking the circuit. This capability ensures maximum safety for electricians working on live systems. The product design prioritizes user protection with a finger guard and automatic power off functionality. Operational flexibility includes dual voltage range settings. The default mode covers 50 to 1000 volts, while a high sensitivity range handles 12 to 50 volts for precise low voltage checks. Visual LED indicators and audible buzzers confirm voltage presence. The device responds to electrostatic fields generated by the source voltage. It can detect voltage through wire insulation or cable breaks. Identification of polarity on receptacles is possible within limits. Indoor and outdoor applications benefit from the IP65 waterproof rating. Safety compliance is paramount for this equipment. It meets CAT IV 1000 V measurement category standards. Certification includes IEC and UL guidelines. Users must test on a known live source before use. Always keep fingers behind the safety guard. Do not use if damaged or if lights fail to flash. Avoid applying voltage exceeding the rated mark on the probe. Battery life is optimized by the automatic shutdown after three minutes of inactivity. The unit requires two 1.5 volt AAA alkaline batteries. Guidance associated with the Beha-Amprobe NCV-1020-EUR VOLTfix Non-contact Voltage Tester Manual outlines specific care instructions. Cleaning should involve mild soapy water and a soft cloth. Avoid harsh solvents like gasoline or chlorinated cleaners. If not used for long periods, remove batteries to prevent leakage. The warranty provides one year of coverage from the purchase date against material defects. Service requires returning the tool with proof of purchase to an authorized center. Replacement units are available for defective tools within the warranty period. Applications extend to junction boxes, fuses, and extension cords. Troubleshooting becomes efficient with this compact tool. It fits easily in a pocket. The magnetic sensor testing applies to higher models but this version excels at standard voltage detection. Temperature operation ranges from zero to forty degrees Celsius. Storage conditions allow down to minus ten degrees Celsius. Altitude rating handles operations up to two thousand meters. Duty cycle is continuous during use. Current consumption remains low at eighty milliamps. These specifications ensure reliability across various job sites. Competent persons should always use this instrument. Training on risks is essential. The device is not for testing absence of voltage. Use a two-pole tester for that purpose. Keep the tip clean and inspect for cracks. Report any issues immediately. Adhere to local safety requirements. Use proper protective equipment as recommended. This product is built for industrial, commercial, and residential needs. It supports efficient diagnostics without interruption. Trust the quality from Beha-Amprobe for your electrical safety needs today. Service centers in the United States and Canada accept warranty returns for exchange. European units are handled through local distributors for nominal charges. Contact information is available on the Beha-Amprobe website for finding nearby locations. This ensures global support for the device. Proper handling extends the lifespan of the unit significantly. Regular calibration and inspection maintain accuracy throughout the operational life of the product. Electrical safety should always be the top priority for any technician. This device is a key component of a safe work environment.

Important Notes

Always verify battery status before use. Ensure the probe flashes on power on. Keep the finger guard intact at all times.

M: QW-35-FL

© Copyright 2026 Manual.ly