Manual.ly Logo

Beha-Amprobe NCV-1020-EUR VOLTfix Manuale

0,0 · 0 Valutazioni

Manuale PDF · 140 Pagine

Italiano

M: QW-35-FL
pagina

/ 140

Loading...
a7b010e326c02f81a952c42bd3bd4f18af37 page e
7
Safety
Compliance
IEC 61010-1 3rd Ed., UL 61010-1 3rd
Ed., UL 61010-2-030, CAN/CSA-C22.2
No.61010-1-12, CAN/CSA-C22.2 No.
61010-2-030-12 to CAT IV 1000 V,
Pollution degree 2, IP65
EMC
Compliance
IEC 61326-1
Korea (KCC): Class A Equipment
(Industrial Broadcasting &
Communication Equipment)
[1]
[1]
This product meets requirements
for industrial (Class A) electromagnetic
wave equipment and the seller or
user should take notice of it. This
equipment is intended for use in
business environments and is not to
be used in homes.
Certications
BATTERY REPLACEMENT & CARE
Low Battery Indication
The NCV-1030/1040-EUR (MAGNO-)VOLTx Voltage
Probe provide a low battery indication in the form
of a very slowly blinking red LED upon power on
when battery level is low and the batteries should
be replaced. At that point no voltage indication is
possible.
The NCV-1020-EUR VOLTx does not provide the
same indication; instead, batteries will need to be
replaced when no LED appears upon power on.
Battery Replacement
To remove the battery cap, use the thumb grip to
pull it upwards and outwards. Remove batteries
and replace with (2) AAA 1.5 V alkaline batteries,
noting the battery orientation as shown on the
side of the Voltage Probe. Replace the cap.
If the Voltage Probe will not be used for a long
period of time, remove the batteries.
Battery Cap
Latch

Chatta con il manuale del tuo Beha-Amprobe NCV-1020-EUR VOLTfix utilizzando l'IA

Ottieni risposte istantanee dall'IA dal manuale del tuo Beha-Amprobe NCV-1020-EUR VOLTfix

Chiedi qualsiasi cosa sul Beha-Amprobe NCV-1020-EUR VOLTfix. Le risposte provengono da questo manuale, con le pagine di riferimento.

NCV-1020-EUR VOLTfix Programma di manutenzione

Prima e dopo l'uso
Test su fonte di tensione nota

Verificare il funzionamento della sonda testandola su una fonte di tensione nota entro la tensione nominale prima e dopo ogni utilizzo.

Mostra nel manuale (pagina 9)
Prima dell'uso
Ispezionare la punta della sonda per danni

Esaminare attentamente la punta della sonda per crepe o rotture. Non utilizzare se danneggiata o se non lampeggia all'accensione.

Mostra nel manuale (pagina 9)
Secondo necessità
Sostituire le batterie

Sostituire con due batterie alcaline AAA da 1,5 V quando il LED non appare all'accensione (modello NCV-1020-EUR).

Mostra nel manuale (pagina 14)
Durante lo stoccaggio a lungo termine
Rimuovere le batterie

Se la Sonda di Tensione non verrà utilizzata per un lungo periodo, rimuovere le batterie per prevenire perdite.

Mostra nel manuale (pagina 14)
Secondo necessità
Pulire la Sonda di Tensione

Pulire con acqua saponata delicata utilizzando un panno morbido. Lasciare asciugare completamente. Non usare idrocarburi aromatici o benzina.

Mostra nel manuale (pagina 15)
M: qwen/qwen3.8-flash

Fai una Domanda

0/1000

Consigli NCV-1020-EUR VOLTfix?

Sì No

Domande frequenti

A

Press the ON/OFF button momentarily to activate the default voltage range. Press it again to switch to high sensitivity range. Hold for more than two seconds to turn it off.

Questa risposta è utile?

A

It is rated CAT IV 1000 V for use at the source of low voltage installations and meets IEC and UL safety standards.

Questa risposta è utile?

A

Pull the battery cap upwards and off. Insert two 1.5 V AAA alkaline batteries observing polarity marked on the side. Push the cap back on tightly.

Questa risposta è utile?

A

No, this device is designed specifically for detecting AC voltage and will not provide indication for DC sources.

Questa risposta è utile?

A

The product is covered by a one year limited warranty from the date of purchase regarding material and workmanship defects.

Questa risposta è utile?

A

Yes, it has an IP65 rating which makes it resistant to water from low pressure jets and dust ingress for indoor and outdoor use.

Questa risposta è utile?

A

The standard NCV-1020-EUR VOLTfix model does not detect magnetic fields. The NCV-1040-EUR MAGNO-VOLTfix model includes this feature.

Questa risposta è utile?

M: QW-35-FL

Vantaggi e Svantaggi

Vantaggi

  • CAT IV 1000 V safety rating ensures highest level electric protection.
  • IP65 water and dust resistance allows use in harsh outdoor environments.
  • Dual range detection supports both high and low voltage AC systems.
  • Audible and visual alerts provide clear feedback during testing procedures.
VS

Svantaggi

  • Does not verify absence of voltage so secondary testing is required.
  • Battery life is limited by the auto power off feature timing.
  • Cannot detect magnetic fields as the higher MAGNO models can.
M: QW-35-FL

Prodotto Specifiche

Intervallo di misura

50-1.000 V

M: QW-35-FL

Descrizione del prodotto Descrizione

Beha-Amprobe NCV-1020-EUR VOLTfix Review

The Beha-Amprobe NCV-1020-EUR VOLTfix Non-contact Voltage Tester stands as a premier tool for electrical professionals. It offers non-contact voltage detection up to 1000 volts AC without breaking the circuit. This capability ensures maximum safety for electricians working on live systems. The product design prioritizes user protection with a finger guard and automatic power off functionality. Operational flexibility includes dual voltage range settings. The default mode covers 50 to 1000 volts, while a high sensitivity range handles 12 to 50 volts for precise low voltage checks. Visual LED indicators and audible buzzers confirm voltage presence. The device responds to electrostatic fields generated by the source voltage. It can detect voltage through wire insulation or cable breaks. Identification of polarity on receptacles is possible within limits. Indoor and outdoor applications benefit from the IP65 waterproof rating. Safety compliance is paramount for this equipment. It meets CAT IV 1000 V measurement category standards. Certification includes IEC and UL guidelines. Users must test on a known live source before use. Always keep fingers behind the safety guard. Do not use if damaged or if lights fail to flash. Avoid applying voltage exceeding the rated mark on the probe. Battery life is optimized by the automatic shutdown after three minutes of inactivity. The unit requires two 1.5 volt AAA alkaline batteries. Guidance associated with the Beha-Amprobe NCV-1020-EUR VOLTfix Non-contact Voltage Tester Manual outlines specific care instructions. Cleaning should involve mild soapy water and a soft cloth. Avoid harsh solvents like gasoline or chlorinated cleaners. If not used for long periods, remove batteries to prevent leakage. The warranty provides one year of coverage from the purchase date against material defects. Service requires returning the tool with proof of purchase to an authorized center. Replacement units are available for defective tools within the warranty period. Applications extend to junction boxes, fuses, and extension cords. Troubleshooting becomes efficient with this compact tool. It fits easily in a pocket. The magnetic sensor testing applies to higher models but this version excels at standard voltage detection. Temperature operation ranges from zero to forty degrees Celsius. Storage conditions allow down to minus ten degrees Celsius. Altitude rating handles operations up to two thousand meters. Duty cycle is continuous during use. Current consumption remains low at eighty milliamps. These specifications ensure reliability across various job sites. Competent persons should always use this instrument. Training on risks is essential. The device is not for testing absence of voltage. Use a two-pole tester for that purpose. Keep the tip clean and inspect for cracks. Report any issues immediately. Adhere to local safety requirements. Use proper protective equipment as recommended. This product is built for industrial, commercial, and residential needs. It supports efficient diagnostics without interruption. Trust the quality from Beha-Amprobe for your electrical safety needs today. Service centers in the United States and Canada accept warranty returns for exchange. European units are handled through local distributors for nominal charges. Contact information is available on the Beha-Amprobe website for finding nearby locations. This ensures global support for the device. Proper handling extends the lifespan of the unit significantly. Regular calibration and inspection maintain accuracy throughout the operational life of the product. Electrical safety should always be the top priority for any technician. This device is a key component of a safe work environment.

Important Notes

Always verify battery status before use. Ensure the probe flashes on power on. Keep the finger guard intact at all times.

M: QW-35-FL

© Copyright 2026 Manual.ly