Manual.ly Logo

Worx WX261.9 Manuale

0,0 · 0 Valutazioni

Manuale PDF · 128 Pagine

Italiano

M: OA-GPT-5-NAN
pagina

/ 128

Loading...
54f460346d3d5a3fb40e52c772826920c03a page c
12
20V Brushless Impact Driver
EN
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined
according to EN 62841:
Vibration emission value:
a
h
= 7.446m/s
2
Uncertainty K = 1.5m/s
The declared vibration total value and the declared
noise emission value have been measured in
accordance with a standard test method and may be
used for comparing one tool with another.
The declared vibration total value and the declared
noise emission value may also be used in a preliminary
assessment of exposure.
WARNING: The vibration and noise emissions
during actual use of the power tool can differ
from the declared value depending on the ways
in which the tool is used especially what kind of
workpiece is processed dependant on the following
examples and other variations on how the tool is used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well maintained.
The use of the correct accessory for the tool and
ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti
vibration and noise accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration
syndrome if its use is not adequately managed.
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of use
should also take account of all parts of the operating
cycle such as the times when the tool is switched off
and when it is running idle but not actually doing the
job. This may significantly reduce the exposure level
over the total working period.
Helping to minimise your vibration and noise exposure
risk.
Always use sharp chisels, drills and blades.
Maintain this tool in accordance with these
instructions and keep well lubricated (where
appropriate).
If the tool is to be used regularly then invest in anti
vibration and noise accessories.
Plan your work schedule to spread any high vibration
tool use across a number of days.
4.INTENDED USE
This tool is intended for the fastening and loosening of
bolts, nuts and various threaded fasteners. This tool is
not intended for use as a drill.
5.OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
ASSEMBLY AND OPERATION
ACTION FIGURE
BEFORE OPERATION
Checking the Battery Pack Condition See Fig .A1
Removing the Battery Pack See Fig. A2
Charging the Battery Pack See Fig. A3
Installing the Battery Pack See Fig. A4
ASSEMBLY AND ADJUSTMENT
Assembling the Hook and Bit Clip
See Fig. B1,
B2, B3, B4
Inserting the Bits See Fig. C1
Removing the Bits See Fig. C2
Forward / Reverse / Lock
WARNING Never change the
direction of rotation when
the chuck is rotating, wait until it
is stopped!
See Fig. D1,
D2, D3
OPERATION
Operating the On/Off Switch
WARNING Do not operate for
long periods at low speed
because excess heat will be
produced internally.
Variable 3-Speed
Press the red button to select
preferred rotation speed, levels 1 to 3,
with 3 being the fastest. The operating
speed will be illuminated.
See Fig. E

Chatta con il manuale del tuo Worx WX261.9 utilizzando l'IA

Ottieni risposte istantanee dall'IA dal manuale del tuo Worx WX261.9

Chiedi qualsiasi cosa sul Worx WX261.9. Le risposte provengono da questo manuale, con le pagine di riferimento.

WX261.9 Programma di manutenzione

Prima dell'uso
Rimuovere la batteria prima della manutenzione

Rimuovere sempre il pacco batterie dallo strumento prima di eseguire qualsiasi operazione di regolazione, assistenza o manutenzione.

Mostra nel manuale (pagina 12)
Quando necessario
Pulire con un panno asciutto

Non utilizzare mai acqua o detergenti chimici. Pulire con un panno asciutto per rimuovere polvere e detriti.

Mostra nel manuale (pagina 12)
Quando necessario
Mantenere puliti gli sportelli di ventilazione

Assicurarsi che gli sportelli di ventilazione del motore siano liberi dalla polvere per prevenire il surriscaldamento e garantire un funzionamento corretto.

Mostra nel manuale (pagina 12)
M: QW-35-FL

Fai una Domanda

0/1000

Consigli WX261.9?

Sì No

Domande frequenti

A

La WX261.9 Nitro entrega hasta 260 Nm de par máximo, lo que la hace adecuada para tareas de apriete y aflojado pesadas cuando se usa con una batería Worx 20V apropiada.

Questa risposta è utile?

A

Sí — utiliza un motor sin escobillas, que ofrece mayor eficiencia, mayor vida útil del motor, menos mantenimiento y, a menudo, mejor autonomía en comparación con los motores con escobillas.

Questa risposta è utile?

A

La herramienta cuenta con sistemas de protección contra sobrecarga, sobrecalentamiento y batería baja que hacen parpadear el LED y cortan la alimentación para proteger el motor y la batería. También incorpora bloqueo de avance/retroceso, ranuras de ventilación y recomendaciones de seguridad para el manejo y la eliminación de baterías.

Questa risposta è utile?

A

La WX261.9 forma parte de Worx 20V PowerShare; los modelos de batería compatibles van de 1.5 Ah a 6.0 Ah (por ejemplo, WA3550–WA3641) y los cargadores de 0.4A a 4.0A. Use únicamente las baterías y cargadores especificados por Worx para seguridad y cumplimiento de la garantía.

Questa risposta è utile?

A

La herramienta ofrece tres rangos de velocidad variables: aprox. 0–900, 0–2400 y 0–3000 rpm, con tasas de impactos correspondientes de hasta ~4000 ipm en el ajuste más alto. Un botón rojo selecciona el nivel de velocidad e ilumina el ajuste activo.

Questa risposta è utile?

A

Retire la batería antes del mantenimiento, mantenga las ranuras de ventilación limpias, limpie con un paño seco (sin agua ni limpiadores químicos), guarde en un lugar seco y siga los ciclos de carga adecuados. El diseño sin escobillas minimiza el mantenimiento rutinario.

Questa risposta è utile?

A

Un LED que parpadea rápidamente indica que se activó el sistema de protección (sobrecarga, sobrecalentamiento o batería baja), que corta la alimentación para proteger los componentes. Suelte el gatillo, aplique la solución correspondiente (dejar enfriar, reducir la carga, recargar) y reanude cuando sea seguro.

Questa risposta è utile?

M: OA-GPT-5-NAN

Vantaggi e Svantaggi

Vantaggi

  • Motor sin escobillas para mejor eficiencia, menor mantenimiento y mayor vida útil.
  • Alto par máximo (260 Nm) adecuado para tareas de apriete pesadas.
  • Control variable de tres velocidades para precisión y flexibilidad de tareas.
  • Herramienta desnuda ligera (1.1 kg) con mango de agarre blando y gancho para mayor comodidad y portabilidad.
  • Protecciones integradas (sobrecarga, sobrecalentamiento, batería baja) y luz de trabajo LED para operación segura.
VS

Svantaggi

  • El nivel de vibración declarado (ah ≈ 7.446 m/s²) puede requerir medidas antivibración para uso prolongado.
  • Nivel de ruido (LpA ≈ 83.6 dB(A)) que requiere protección auditiva durante la operación.
  • La herramienta no está diseñada ni optimizada para taladrar — limitada a aplicaciones de apriete.
  • La batería y el cargador deben ser especificados por Worx; no se admiten cargadores de terceros.
  • Herramienta desnuda vendida en solitario — baterías y cargador son compras adicionales para su uso completo.
M: OA-GPT-5-NAN

Prodotto Specifiche

Tipo

Avvitatore a impulsi

Batteria

20V, Li-ion

VelocitA' a vuoto

0-900/0-2400/0-3000/min

Frequenza d'impatto a vuoto

0-1200/0-3300/0-4000/min

Coppia

max. 260 Nm

Attacco utensile

Portainserti da 1/4"

Caratteristiche

Rotazione avanti/indietro, Controllo velocitA', Controllo frequenza d'impatto, MultivelocitA', Luce da lavoro a LED, Impugnatura morbida, Motore brushless, Clip da cintura

Peso

1,10 kg (senza batteria)

Dotazione

senza caricabatterie e batteria

M: GO-GEM-FL-25

Descrizione del prodotto Descrizione

Worx WX261.9 Nitro 20V PowerShare Cordless Impact Wrench solo Manual

The Worx WX261.9 Nitro 20V PowerShare Cordless Impact Wrench is a compact, brushless cordless impact driver built for fastening and loosening bolts, nuts and a variety of threaded fasteners. Powered by the 20V PowerShare system (nominally 18V, measured up to 20V), this lightweight 1.1 kg bare tool delivers up to 260 Nm of maximum torque and three variable speed ranges to match tasks from light screwdriving to heavy-duty fastening.

Equipped with a brushless motor for improved efficiency and longer life, the WX261.9 offers step-selectable no-load speeds (approx. 0–900, 0–2400, 0–3000 rpm) and corresponding impact rates for precise control. A variable 3-speed selector and a soft-grip handle let users dial in performance for different materials and fasteners. The tool accepts 6.35 mm (1/4") bits and includes features such as an LED work light, forward/reverse control with lock, a bit clip and hook for convenience, and a battery capacity indicator when paired with compatible Worx batteries.

Safety and durability are central: the wrench includes multiple protection systems that cut power under overload, overheating, or low battery conditions. Acoustic and vibration emissions are specified (LpA ≈ 83.6 dB(A); declared vibration ah ≈ 7.446 m/s²), so hearing protection and anti-vibration practices are advised for extended use. The manual stresses routine checks, correct battery charging (use only Worx chargers), safe battery handling, and proper disposal/recycling of batteries and electrical waste.

Maintenance is minimal — the brushless design reduces upkeep — but users should keep ventilation slots clean, avoid water or chemical cleaners, and remove the battery before any servicing. The tool is intended for fastening tasks only, not as a drill. A clear troubleshooting section covers common issues like charging orientation, reduced runtime, and protective shutdown behaviors.

Notes:

  • Compatible batteries and chargers are listed for capacity choices (1.5Ah–6.0Ah) and chargers (0.4A–4.0A). Use only specified Worx chargers and batteries.
  • The tool features thermal and overload protection that will flash the LED and cut power if limits are exceeded; allow cooling before restarting.
  • Observe recommended temperature ranges for operation and charging (use/storage: 0°C–45°C; charging: 0°C–40°C).
M: OA-GPT-5-NAN

© Copyright 2026 Manual.ly