Manual.ly Logo

Worx WX183 Manuale

0,0 · 0 Valutazioni

Manuale PDF · 120 Pagine

Italiano

M: QW-35-FL
pagina

/ 120

Loading...
fcab346f8e880c02fd3937ecb9be76cf1bf6 page 1e
3130
Trapano/avvitatore con
btteria agli ioni di litio
I
1. MANDRINO
2. ANELLO DI REGOLAZIONE DELLA COPPIA
3. CONTROLLO DELLE MARCE A DUE VELOCITÀ
4. SELETTORE ROTAZIONE: NORMALE, INVERTITA E BLOCCO
5. IMPUGNATURA MORBIDA
6. UNITÀ BATTERIA *
7. SERRATURA A SCATTO UNITÀ BATTERIA
8. LUCE FRONTALE
9. TASTO ON/OFF CON VELOCITÀ VARIABILE
* Accessori illustrati o descritti non fanno necessariamente parte del volume di consegna.
DATI TECNICI
Codice WX183 WX183.1 WX183.9 (1-designazione del macchinario
rappresentativo del Trapano a percussione a batteria)
WX183 WX183.1 WX183.9
Voltaggio 20V Max**
Velocità senza carico 0-500/ 0-1700/min
Numero di posizioni della frizione 18+1
Coppia max 50N.m
Capacità del mandrino 13mm
Perforazione max.
Acciaio 13mm
Legno 35mm
Peso dell’utensile 1.66kg
**Tensione misurata senza carico di lavoro. La tensione iniziale della batteria raggiunge un
massimo di 20 Volt. La tensione nominale è di 18 Volt.

Chatta con il manuale del tuo Worx WX183 utilizzando l'IA

Ottieni risposte istantanee dall'IA dal manuale del tuo Worx WX183

Chiedi qualsiasi cosa sul Worx WX183. Le risposte provengono da questo manuale, con le pagine di riferimento.

WX183 Programma di manutenzione

Dopo ogni utilizzo
Rimuovere il pacco batteria dall'utensile

Rimuovere il pacco batteria dall'attrezzatura quando non in uso per garantire la sicurezza e una corretta conservazione.

Mostra nel manuale (pagina 9)
Quando sporco
Pulire i terminali della batteria con un panno asciutto

Se i terminali del pacco batteria diventano sporchi, pulirli con un panno pulito e asciutto.

Mostra nel manuale (pagina 9)
Regolarmente
Mantenere pulite le fessure di ventilazione del motore

Assicurarsi che le fessure di ventilazione del motore siano prive di polvere e detriti per prevenire il surriscaldamento.

Mostra nel manuale (pagina 12)
Regolarmente
Mantenere i comandi di lavoro privi di polvere

Mantenere tutti i comandi operativi privi di polvere per garantire il corretto funzionamento.

Mostra nel manuale (pagina 12)
M: qwen/qwen3.8-flash

Fai una Domanda

0/1000

Consigli WX183?

Sì No

Domande frequenti

A

Check if the forward/reverse rotation control lever is locked in the center position. Unlock it by moving it fully to the left or right side, then press the trigger again to start the drill.

Questa risposta è utile?

A

The built-in LED light will flash rapidly when the battery capacity is low. This indicates that the battery needs to be removed and recharged immediately to avoid stopping mid-task.

Questa risposta è utile?

A

Yes, the Worx WX183 is designed for impact drilling in wood and metal. For masonry or concrete, ensure you are using the correct hammer drill setting and appropriate masonry bits.

Questa risposta è utile?

A

If the tool stops because it has overheated, release the trigger and allow the drill and battery to cool down completely before attempting to restart. Avoid using the tool at low speeds for long periods to prevent heat buildup.

Questa risposta è utile?

A

Ensure the drill is turned off and the trigger is locked. Insert the bit fully into the chuck and tighten the chuck key or hand-tighten until secure. Never operate the tool with a loose bit.

Questa risposta è utile?

A

Yes, the battery pack is easily removable via the release button. You can take it out of the tool and place it directly into the charger for convenient recharging anywhere.

Questa risposta è utile?

M: QW-35-FL

Vantaggi e Svantaggi

Vantaggi

  • Two-speed gearbox offers versatility for drilling and screwdriving tasks
  • LED work light improves visibility in dim environments
  • Compatible with Worx Powershare battery system for multi-tool usage
  • 18+1 torque settings provide precise control for various materials
  • Soft grip handle reduces hand fatigue during prolonged use
VS

Svantaggi

  • Maximum drilling depth in metal is limited to 13mm
  • Battery life decreases significantly under heavy load conditions
  • No auxiliary handle included for added stability on large jobs
  • Tool may stop if overheated, requiring cool-down time
  • Charging time can be lengthy depending on battery depletion level
M: QW-35-FL

Prodotto Specifiche

Tipo

Cacciavite

Velocità a vuoto

0-500/0-1700 giri/min

Capacità di foratura

Legno 3,5 cm, Acciaio 1,3 cm

Coppia

60 Nm, 19 livelli (18+1)

Tipo di morsetto

Morsa senza chiave

Caratteristiche

Avanti/indietro, Velocità variabile, Cambio a due velocità, Regolazione coppia, Luce di lavoro LED, Impugnatura morbida

Peso

1,66 kg

M: QW-35-FL

Descrizione del prodotto Descrizione

Worx WX183 Powershare Cordless Drill: Power Meets Precision

The Worx WX183 Powershare Cordless Drill stands as a versatile powerhouse for both DIY enthusiasts and professional contractors. Designed with a robust lithium-ion battery system, this tool delivers consistent performance across a wide range of tasks, from drilling into tough steel to driving screws into hardwood. The drill features a powerful motor capable of reaching speeds up to 1700 RPM in high gear, ensuring efficiency when tackling demanding projects.

One of the standout features of the WX183 is its two-speed gearbox, allowing users to switch between low speed for high torque applications and high speed for faster drilling. The adjustable torque ring offers 18 settings plus a drill mode, providing precise control to prevent over-tightening or damaging materials. Safety is paramount, with an LED work light illuminating dark workspaces and a soft-grip handle reducing user fatigue during extended use.

The drill includes intelligent protection systems that monitor battery health and tool temperature. If the drill becomes overloaded or overheated, it automatically shuts down to protect the internal components and extend the lifespan of the battery. The LED indicator also serves as a battery capacity gauge, flashing when power runs low so you can recharge before stopping mid-job.

This cordless drill is part of the Worx Powershare ecosystem, meaning its battery is compatible with other tools in the series, offering great value and flexibility. Whether you are assembling furniture, building a deck, or performing household repairs, the Worx WX183 provides the reliability and power needed to get the job done right.

Important Notes

  • Always remove the battery before changing bits or performing maintenance.
  • Do not charge the battery at temperatures below 0°C or above 30°C.
  • Use only the charger specified by Worx to ensure safety and performance.
M: QW-35-FL

© Copyright 2026 Manual.ly