Manual.ly Logo

Monacor MBM-1002 Manuale

0,0 · 0 Valutazioni

Manuale PDF · 3 Pagine

Italiano

M: OA-GPT-54-NAN
pagina

/ 3

Loading...
0b37321b30fa80d758e6a877be55aa6df2ae page 1
ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS ELECTRONICS
MONACOR INTERNATIONAL GmbH & Co. KG • Zum Falsch 36 • 28307 Bremen • Germany
Copyright
©
by MONACOR INTERNATIONAL. All rights reserved.
A-0495.98.04.04.2016
1
2
3
4
5
MB-5002 Bestell-Nr. • Order No. 38.2720
MBM-1002 Bestell-Nr. • Order No. 38.2350
Mirror Ball and Motor
Please read these operating instructions carefully
prior to operating the unit and keep them for
later use.
1 Applications
In connection with a spotlight (e. g. PAR-36 /…), the mir-
ror ball MB-5002 serves for creating light effects and is
ideally suited for use in public areas (discothèque, thea-
tre, etc.). The mirror ball is specially designed for ceiling
suspension and is driven by the motor MBM-1002.
2 Safety Notes
The motor corresponds to all relevant directives of the
EU and is therefore marked with .
WARNING The motor is supplied with hazardous
mains voltage. Leave servicing to skilled
personnel only. Inexpert handling may
cause an electric shock hazard.
•
The motor is suitable for indoor use only. Protect it
against dripping water and splash water, high air
humid ity, and heat (admissible ambient temperature
range 0 – 40 °C).
•
Always wear gloves when handling mirror balls; glass
splinters may cause injuries!
•
Do not operate the motor and immediately discon-
nect it from the mains voltage:
1. in case of visible damage to the motor or to the
mains cable,
2. if a defect might have occurred after the unit was
dropped or suffered a similar accident,
3. if malfunctions occur.
In any case the motor must be repaired by skilled
personnel.
•
A damaged mains cable must be replaced by skilled
personnel only.
•
For cleaning the motor only use a dry, soft cloth;
never use water or chemicals. For the mirror ball, a
commercial glass cleaner may be used.
•
No guarantee claims for the motor or the mirror ball
and no liability for any resulting personal damage
or material damage will be accepted if the items are
used for other purposes than originally intended, if
they are not correctly mounted or connected, or not
repaired in an expert way.
•
Important for U. K. Customers!
The wires in this mains lead are coloured in accord-
ance with the following code:
green / yellow = earth, blue = neutral, brown = live
As the colours of the wires in the mains lead of this
appliance may not correspond with the coloured
markings identifying the terminals in your plug, pro-
ceed as follows:
1. The wire which is coloured green and yellow must
be connected to the terminal in the plug which is
marked with the letter E or by the earth symbol ,
or coloured green or green and yellow.
2. The wire which is coloured blue must be con-
nected to the terminal which is marked with the
letter N or coloured black.
3. The wire which is coloured brown must be con-
nected to the terminal which is marked with the
letter L or coloured red.
Warning – This appliance must be earthed.
If the motor and the mirror ball are to be put
out of operation definitively, take them to a
local recycling plant for a disposal which is not
harmful to the environment.
3 Mounting
WARNING The motor MBM-1002 and the mirror ball
MB-5002 are perfectly matched; only use
them together. Mount the ball safely and
expertly to the motor as described below.
Make sure that it will not work loose and
drop on the audience.
1) Fasten the motor to a suitable spot on the ceiling by
means of four screws. Suspend the ball in such a way
that it will be out of reach of the audience.
2) Use the large eyebolt (4) to hook the ball into the
chain fastener (3). If you wish to reduce the suspen-
sion height of the ball, insert a chain of sufficient
stability. Tighten the fastener (3) to secure the ball.
3) Hook the safety rope (2) into the eyebolt (1) of the
motor and into the small eyebolt (5) of the ball.
Tighten the fasteners to secure the rope.
4) The connection of the motor to the mains (230 V/
50 Hz) must always be made by skilled personnel.
5) Check the ball at regular intervals to make sure that
it is still safely suspended.
4 Specifications
Motor MBM-1005
Power supply: . . . . . . . . . . 230 V/ 50 Hz / 5 VA
Carrying capacity: . . . . . . . 10 kg
Rotating speed: . . . . . . . . 1.5 rpm
Dimensions, weight: . . . . . ⌀ 195 mm × 127 mm, 1 kg
Mirror ball MB-5002
Dimensions: . . . . . . . . . . . ⌀ 50 cm
Weight: . . . . . . . . . . . . . . . 6.2 kg
Subject to technical modification.
Spiegelkugel und Motor
Bitte lesen Sie diese Anleitung vor der Inbetrieb-
nahme gründlich durch und heben Sie sie für ein
späteres Nachlesen auf.
1 Einsatzmöglichkeiten
Die Spiegelkugel MB-5002 dient in Verbindung mit
einem Punktstrahler (z. B. PAR-36 /…) zur Erzeugung
von Lichteffekten und ist für den Einsatz in öffent-
lichen Bereichen (Diskothek, Theater etc.) geeignet. Sie
ist speziell für die Deckenmontage konzipiert und wird
durch den Motor MBM-1002 angetrieben.
2 Hinweise für den sicheren Gebrauch
Der Motor entspricht allen relevanten Richtlinien der
EU und ist deshalb mit gekennzeichnet.
WARNUNG Der Motor wird mit lebensgefährlicher
Netzspannung versorgt. Nehmen Sie des-
halb niemals selbst Eingriffe an ihm vor.
Es besteht die Gefahr eines elektrischen
Schlages.
•
Der Motor ist nur zur Verwendung im Innenbereich
geeignet. Schützen Sie ihn vor Tropf- und Spritz-
wasser, hoher Luftfeuchtigkeit und Hitze (zulässiger
Einsatztemperaturbereich 0 – 40 °C).
•
Tragen Sie beim Umgang mit Spiegelkugeln grund-
sätzlich Handschuhe. Beachten Sie die Schnitt- und
Splittergefahr durch Glas!
•
Nehmen Sie den Motor nicht in Betrieb und trennen
Sie ihn sofort von der Netzspannung:
1. wenn sichtbare Schäden am Motor oder am Netz-
kabel vorhanden sind,
2. wenn nach einem Sturz oder Ähnlichem der Ver-
dacht auf einen Defekt besteht,
3. wenn Funktionsstörungen auftreten.
Geben Sie den Motor in jedem Fall zur Reparatur in
eine Fachwerkstatt.
•
Ein beschädigtes Netzkabel darf nur durch eine Fach-
werkstatt ersetzt werden.
•
Verwenden Sie für die Reinigung des Motors nur ein
trockenes, weiches Tuch, auf keinen Fall Chemikalien
oder Wasser. Für die Spiegelkugel können handels-
übliche Glasreiniger verwendet werden.
•
Wird der Motor oder die Spiegelkugel zweckent-
fremdet, nicht fachgerecht montiert, falsch ange-
schlossen oder nicht fachgerecht repariert, kann
keine Garantie für diese Teile und keine Haftung für
daraus resultierende Sach- oder Personenschäden
übernommen werden.
Sollen der Motor und die Spiegelkugel end-
gültig aus dem Betrieb genommen werden,
übergeben Sie sie zur umweltgerechten Ent-
sorgung einem örtlichen Recyclingbetrieb.
3 Montage
WARNUNG Der Motor MBM-1002 und die Spiegel-
kugel MB-5002 sind genau aufeinander
abgestimmt und dürfen nur zusammen
verwendet werden. Die Kugel muss, wie
folgt beschrieben, sicher und fachgerecht
am Motor montiert werden, damit sie sich
nicht lösen und auf Personen fallen kann.
1) Den Motor mit 4 Schrauben an geeigneter Stelle der
Decke festschrauben. Die Kugel muss außerhalb der
Reichweite des Publikums aufgehängt werden.
2) Die Kugel mit der großen Öse (4) in den Kettenver-
schluss (3) einhängen. Soll die Kugel tiefer gehängt
werden, kann auch eine ausreichend stabile Kette
dazwischen montiert werden. Den Kettenverschluss
(3) fest zuschrauben.
3) Das Sicherungsseil (2) in die Öse (1) des Motors und
in die kleine Öse (5) der Kugel einhängen. Die Ver-
schlüsse fest zuschrauben.
DeutschEnglish
4) Der Anschluss des Motors an das Stromnetz (230 V/
50 Hz) darf nur durch qualifiziertes Fachpersonal
erfolgen.
5) In regelmäßigen Abständen überprüfen, ob die
Kugel noch sicher hängt.
4 Technische Daten
Motor MBM-1005
Stromversorgung: . . . . . . . 230 V/ 50 Hz / 5 VA
Tragfähigkeit: . . . . . . . . . . 10 kg
Drehgeschwindigkeit: . . . 1,5 U / min
Abmessungen: . . . . . . . . . ⌀ 195 mm × 127 mm
Gewicht: . . . . . . . . . . . . . . 1 kg
Spiegelkugel MB-5002
Abmessungen: . . . . . . . . . ⌀ 50 cm
Gewicht: . . . . . . . . . . . . . . 6,2 kg
Änderungen vorbehalten.

Chatta con il manuale del tuo Monacor MBM-1002 utilizzando l'IA

Ottieni risposte istantanee dall'IA dal manuale del tuo Monacor MBM-1002

Chiedi qualsiasi cosa sul Monacor MBM-1002. Le risposte provengono da questo manuale, con le pagine di riferimento.

MBM-1002 Programma di manutenzione

Ricordami quando e' necessaria la manutenzione
Annuale
Controllare la sicurezza della sospensione della sfera

Verificare a intervalli regolari che la sfera specchiata rimanga sospesa in modo sicuro e fermo.

Mostra nel manuale (pagina 1)
Se necessario
Pulire l'esterno del motore

Utilizzare solo un panno morbido e asciutto; non usare mai acqua o prodotti chimici sul motore.

Mostra nel manuale (pagina 1)
Se necessario
Pulire la sfera specchiata

Per la sfera specchiata si puo utilizzare un detergente per vetri commerciale.

Mostra nel manuale (pagina 1)

Promemoria di manutenzione gratuiti

In base alla data di acquisto. Sempre gratuito, annulla l'iscrizione in qualsiasi momento.

Inviando, accetti l'informativa sulla privacy. Puoi annullare l'iscrizione con un clic in qualsiasi email.
M: QW-35-FL

Fai una Domanda

0/1000

Consigli MBM-1002?

Sì No

Domande frequenti

A

È un motore progettato per far ruotare la palla a specchi MB-5002 e creare effetti luminosi decorativi in locali al chiuso come club, teatri e spazi per eventi.

Questa risposta è utile?

A

No. Il motore è destinato solo all'uso interno. Deve essere protetto da acqua gocciolante, spruzzi, umidità elevata e calore eccessivo.

Questa risposta è utile?

A

Il motore funziona a 230 V / 50 Hz e ha una potenza nominale di 5 VA. Il collegamento elettrico deve essere eseguito da personale qualificato.

Questa risposta è utile?

A

È abbinato specificamente alla palla a specchi Monacor MB-5002. I due prodotti sono progettati per essere utilizzati insieme in modo sicuro e corretto.

Questa risposta è utile?

A

La velocità di rotazione è di circa 1,5 giri/min. Questo movimento lento crea un effetto di riflesso delicato e atmosferico anziché una rotazione rapida.

Questa risposta è utile?

A

Usare un panno morbido e asciutto per il motore ed evitare acqua o prodotti chimici. La palla a specchi può essere pulita con un normale detergente per vetri e la sospensione deve essere controllata regolarmente.

Questa risposta è utile?

M: OA-GPT-54-NAN

Vantaggi e Svantaggi

Vantaggi

  • Design abbinato alla palla a specchi MB-5002 garantisce un'accoppiata affidabile.
  • La rotazione lenta a 1,5 giri/min crea effetti luminosi fluidi e classici.
  • La capacità di carico di 10 kg si adatta a installazioni di palla a specchi di medie dimensioni.
  • La fune di sicurezza e il fissaggio a catena supportano un montaggio sicuro a soffitto.
VS

Svantaggi

  • Solo per uso interno, quindi non è adatto a eventi all'aperto.
  • Il collegamento elettrico deve essere eseguito da personale qualificato.
  • Funziona al meglio solo con la palla a specchi MB-5002 corrispondente.
  • Richiede controlli regolari per mantenere l'allestimento sicuro.
M: OA-GPT-54-NAN

Prodotto Specifiche

Tipo

Motore

Velocita' di rotazione

2/min

Colore

nero

Peso

950 g

M: GO-GEM-FL-25

Descrizione del prodotto Descrizione

Monacor MBM-1002: Movimento affidabile per effetti con palla a specchi

Il Monacor MBM-1002 è progettato per un solo scopo: dare vita a una palla a specchi con una rotazione fluida e costante. In abbinamento con la palla a specchi MB-5002, trasforma una normale installazione a soffitto in il fulcro di uno spettacolo di luci classico. In club, teatri, spazi per eventi e altri locali al chiuso, questo motore compatto contribuisce a creare i riflessi scintillanti che definiscono un'atmosfera memorabile.

Se stai cercando il manuale del Monacor MBM-1002, il messaggio essenziale è semplice: questa unità è progettata per un uso sicuro e abbinato con la MB-5002. Questo abbinamento è importante perché il motore, l'hardware di sospensione e la portata sono pensati per funzionare insieme. Con una capacità di carico di 10 kg e una velocità di rotazione di 1,5 giri/min, produce un movimento calmo ed elegante anziché una rotazione distraente. Questo lo rende particolarmente adatto a effetti ambientali in cui la costanza è più importante della velocità.

L'installazione è semplice per i professionisti, ma deve essere eseguita con attenzione. Il motore viene montato al soffitto con quattro viti, mentre la palla viene fissata tramite la catena di aggancio e una fune di sicurezza aggiuntiva. Questo doppio livello di sicurezza è un dettaglio importante, perché la palla a specchi deve rimanere saldamente in posizione sopra il pubblico. L'unità funziona a 230 V / 50 Hz, quindi il collegamento elettrico dovrebbe essere sempre affidato a personale qualificato.

Il MBM-1002 è progettato solo per uso interno e l'ambiente operativo dovrebbe rimanere asciutto e temperato. Si consigliano ispezioni regolari per verificare che la palla resti sospesa in sicurezza. Per la manutenzione, per il motore basta un panno morbido e asciutto, mentre la palla a specchi può essere pulita con un normale detergente per vetri. Anche i guanti sono una scelta intelligente quando si maneggia la palla, poiché i bordi di vetro possono essere taglienti.

Per i locali che desiderano un effetto scintillante affidabile e in stile classico, il Monacor MBM-1002 offre una soluzione pratica e mirata. Non cerca di fare tutto; fa bene un solo lavoro, ed è per questo che rimane una scelta utile per gli impianti di illuminazione decorativa.

Note

  • Usare solo con la palla a specchi MB-5002 corrispondente.
  • Tenere l'allestimento al chiuso e lontano dall'umidità.
  • Controllare regolarmente la sospensione per sicurezza.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly