Manual.ly Logo

JBL Aquaristic ProTemp e500 Manuale

0,0 · 0 Valutazioni

Manuale PDF · 86 Pagine

Italiano

M: QW-35-FL
pagina

/ 86

Loading...
269db07ec59b829f9e26aa2df9e9c889493b page a
4
2 Vergewissern Sie sich, dass die Netzspannung mit der auf dem Typenschild des Hei-
zers angegeben Spannung übereinstimmt. Dann verbinden Sie den Heizer mit dem
Stromnetz.
Bedienung
1 Drücken Sie die grüne Wahltaste so oft, bis die LED Anzeige die gewünschte Aquari-
entemperatur anzeigt. Die Anzeige steigt dabei um jeweils 0,5 °C. Bei Erreichen von
35 ° C beginnt die Anzeige wieder bei 20 ° C usw.
2 Nach Loslassen der Wahltaste wird die aktuelle Ist-Temperatur des durchlaufenden
Wassers angezeigt. Die Kontroll-LED leuchtet grün, wenn gerade geheizt wird. Liegt
die Wassertemperatur über der eingestellten Solltemperatur erscheint E-1 im Display.
Diese Anzeige verschwindet, wenn die Temperatur sich angeglichen hat.
Wartung
1 Reinigen Sie die Innenseite des Heizers regelmäßig (wir empfehlen monatlich) mit
der beigefügten Schlauchbürste von Verunreinigungen. Spülen Sie anschließend mit
einem Wasserstrahl aus der Leitung durch (Abb.C). Achten Sie dabei darauf, dass kein
Wasser in das Gehäuse des Heizers oder auf das Netzkabel gelangt.
Wird die Reinigung der Innenseite längere Zeit vernachlässigt, können Ablagerungen
zu Fehlfunktion durch nicht korrekt erfasste Temperaturen führen.
2 Staub und andere Ablagerungen auf der Außenseite des Heizers entfernen Sie bei
Bedarf mit einem fusselfreien trockenen Tuch.
Störungen
Störungsanzeigen
E - 1
E-1: Wassertemperatur liegt mindestens 1 °C über der eingestellten Temperatur.
Beheben: Reguliert sich von selbst, wenn Wassertemperatur sinkt.
E - 2
E-2: Kein Wasser oder Luftblasen im Heizer.
Beheben: Auf möglichst senkrechte Lage achten und für ausreichend Wasserdurchlauf
sorgen.
E - 3
E-3: Elektronik defekt.
Beheben: Nur durch Fachmann möglich.
E - 8
E-8: Temperatur über 93°C. Kein Wasserdurchlauf, oder Innenseite zu stark verschmutzt.
Beheben: Innenseite des Heizers reinigen mit Schlauchbürste (vergl. Kap. 8 Wartung)
und für ausreichend Wasserdurchlauf sorgen.

Chatta con il manuale del tuo JBL Aquaristic ProTemp e500 utilizzando l'IA

Ottieni risposte istantanee dall'IA dal manuale del tuo JBL Aquaristic ProTemp e500

Chiedi qualsiasi cosa sul JBL Aquaristic ProTemp e500. Le risposte provengono da questo manuale, con le pagine di riferimento.

ProTemp e500 Programma di manutenzione

Ricordami quando e' necessaria la manutenzione
Mensile
Pulire l'interno del riscaldatore

Utilizzare la spazzola per tubi inclusa per rimuovere le impurità dall'interno. Sciacquare con un getto di acqua di rubinetto, assicurandosi che non entri acqua nell'alloggiamento o tocchi il cavo di alimentazione.

Mostra nel manuale (pagina 10)
Secondo necessità
Pulire l'esterno del riscaldatore

Rimuovere polvere e depositi dall'esterno del riscaldatore utilizzando un panno asciutto senza lanugine.

Mostra nel manuale (pagina 10)

Promemoria di manutenzione gratuiti

In base alla data di acquisto. Sempre gratuito, annulla l'iscrizione in qualsiasi momento.

Inviando, accetti l'informativa sulla privacy. Puoi annullare l'iscrizione con un clic in qualsiasi email.
M: qwen/qwen3.8-flash

Fai una Domanda

0/1000

Consigli ProTemp e500?

Sì No

Domande frequenti

A

No, this device is strictly an external flow heater. It must be installed in the outlet hose of an external filter or pump. Submerging it in the aquarium water can cause electric shock and void the warranty.

Questa risposta è utile?

A

The JBL Pro Temp e500 with 500 watts is designed for freshwater aquariums with a volume between 160 and 600 liters. Using it on smaller tanks may result in rapid overheating.

Questa risposta è utile?

A

The device automatically stores the set target temperature during a power outage. When power is restored, it will resume heating to the previously saved setting without manual reprogramming.

Questa risposta è utile?

A

Error code E-1 indicates that the water temperature is at least 1 degree Celsius higher than the set target temperature. The device will regulate itself once the water cools down to the desired level.

Questa risposta è utile?

A

The device is not a toy. Children over 8 years old may use it only under adult supervision after receiving instruction on its operation and safety risks. They should not perform cleaning or maintenance.

Questa risposta è utile?

M: QW-35-FL

Vantaggi e Svantaggi

Vantaggi

  • High precision temperature control with +/- 0.5 C accuracy
  • External design keeps electrical components away from fish
  • LED display shows both actual and set temperatures clearly
  • Includes interchangeable hose connectors for 12/16, 16/22, and 19/25 mm tubes
  • Automatic safety shutdown prevents damage from overheating or dry running
VS

Svantaggi

  • Requires installation in the filter output line, not suitable for all setups
  • Glass heating element is fragile and requires careful handling
  • Must be installed vertically to ensure proper function and air release
  • Monthly internal cleaning is necessary to maintain accuracy
  • Not covered under warranty if damaged due to improper installation
M: QW-35-FL

Prodotto Specifiche

Tipo

Scaldacqua istantaneo

Applicazione

Acquario

Potenza

500 W

Caratteristiche

Regolabile (20-35°C, 0,5°C step, +/-0,5°C accuratezza), display LCD temperatura, connessione tubo 12/16 mm, connessione tubo 16/22 mm, connessione tubo 19/25 mm

M: QW-35-FL

Descrizione del prodotto Descrizione

Elevate Your Aquarium with the JBL Pro Temp e500 Flow Heater

Maintaining a stable and healthy environment for your freshwater fish requires precise temperature control. The JBL Pro Temp e500 Flow Heater for Freshwater Aquariums from 160 to 600 Liters, 500W Manual offers an elegant solution by heating water externally rather than placing a bulky unit inside the tank. This inline heater integrates seamlessly into your filter circuit, ensuring that your aquarium remains aesthetically pleasing while providing consistent warmth.

Why Choose the JBL Pro Temp e500?

Unlike traditional submersible heaters, this external device keeps all electrical components out of the water, reducing clutter and potential hazards within the aquarium itself. It is designed specifically for tanks ranging from 160 to 600 liters, delivering a powerful 500 watts of heating capacity. The unit features a high-precision thermostat capable of maintaining temperatures within a +/- 0.5 degree Celsius range, which is crucial for sensitive species.

The installation process is straightforward but requires attention to detail. You must install the heater in the outlet hose of an external filter or circulation pump, ensuring it is positioned vertically or slightly inclined. The device includes interchangeable hose connections compatible with various tube sizes (12/16, 16/22, and 19/25 mm), making it adaptable to different filtration setups. An LED display provides real-time feedback on both the actual water temperature and your set target, while a control LED indicates when heating is active.

Safety is paramount with the JBL Pro Temp e500. It features automatic shutdown mechanisms to prevent damage during overheating or dry running conditions. If no water flows through the unit, or if air bubbles become trapped, the system will halt operation to protect the glass heating element. Additionally, the target temperature is stored even during power outages, allowing the heater to resume operation at the correct setting once electricity returns.

Maintenance and Care

Regular maintenance ensures longevity and efficiency. It is recommended to clean the interior of the heater monthly using the included brush to remove any mineral deposits or algae. Neglecting this can lead to inaccurate temperature readings and potential malfunctions. The exterior should be wiped down with a dry cloth to remove dust. Always disconnect the device from the power supply before performing any cleaning or maintenance tasks.

Important Notes

  • Never immerse the heater directly in the aquarium water.
  • Ensure a drip loop is formed with the power cable to prevent water ingress into the socket.
  • Do not use extension cords unless they have the correct cable cross-section to avoid overheating.
  • The warranty covers manufacturing defects but excludes glass breakage and cable damage.
M: QW-35-FL

© Copyright 2026 Manual.ly