Manual.ly Logo

GYS Smartmig 162 Manuale

4,6 · 5 Valutazioni

Manuale PDF · 68 Pagine

Italiano

M: OA-GPT-54-NAN
pagina

/ 68

Loading...
3145f1afaba5e763607253ebb14ceab2cb01 page c
12
SMARTMIG
EN
EQUIPMENT INSTALLATION
• Put the machine on the oor (maximum incline of 10°).
• Ensure the work area has sufcient ventillation for welding, and that there is easy access to the control panel.
• The machine must not be used in an area with conductive metal dusts.
• The machine must be placed in a sheltered area away from rain or direct sunlight.
• The machine protection level is IP21, which means :
- Protection against acess to dangerous parts from solid bodies of a ≥12.5mm diameter and,
- Protection against vertically falling drops.
The power cables, extensions and welding cables must be fully uncoiled to prevent overheating.
The manufacturer does not incur any responsability regarding damages to both objects and persons that result from an incorrect
and/or dangerous use of the machine .
MAINTENANCE / RECOMMENDATIONS
• Maintenance should only be carried out by a qualied person. Annual maintenance is recommended.
• Ensure the machine is unplugged from the mains, and wait for two minutes before carrying out maintenance work. DANGER
High Voltage and Currents inside the machine.
• Remove the casing 2 or 3 times a year to remove any excess dust. Take this opportunity to have the electrical connections
checked by a qualied person, with an insulated tool.
• Regularly check the condition of the power supply cable. If the power cable is damaged, it must be replaced by the manufacturer,
its after sales service or an equally qualied person.
• Ensure the ventilation holes of the device are not blocked to allow adequate air circulation.
• Do not use this equipment to thaw pipes, to charge batteries, or to start any engine.
INSTALLATION – PRODUCT OPERATION
DESCRIPTION
Thank you for choosing this machine. To get the best from your machine, please read the following carefully :
The SMARTMIG is a traditional machine for welding semi-automatic MIG/MAG (DC current), and MMA (SMARTMIG 3P Only). These machines can
weld all types of wire : Steel, Stainless Steel, Aluminium, ux (no gas). The SMARTMIG 3P is capable of welding electrodes up to 3.2mm.
Adjustment and Setting of these machines is easy with their SMART feature.
ELECTRICITY SUPPLY
Smartmig 142/152/162/3P/182 :
This machine is tted with a 16A socket type CEE7/7 which must be connected to a single-phase 230V (50 - 60 Hz) power supply tted with three
wires and one earthed neutral.
The absorbed effective current (I1eff) is displayed on the machine, for optimal use. Check that the power supply and its protection (fuse and/or
circuit breaker) are compatible with the current needed by the machine. In some countries, it may be necessary to change the plug to allow the use
at maximum settings.
Smartmig 183 :
The welders are tted with a 1XX A socket type EN 60309-1 which must be connected to a three-phase 400V (50 - 60 Hz) power supply tted with
four wires and one earthed neutral.
The absorbed effective current (I1eff) is displayed on the machine, for optimal use. Check that the power supply and its protection (fuse and/or
circuit breaker) are compatible with the current needed by the machine. In some countries, it may be necessary to change the plug to allow the use
at maximum settings.
DEVICE PRESENTATION (FIG-I)
1- Power Switch Off/On
2- Power Cable
3- Rear handle
4- Wire Reel Support
5- Quick Gas Connector
6- Front Handle
7- Control panel and table for SMART feature
8- Drive Reel
9- Rear Wheels (162, 3P & 182 only)
10- EURO torch connector (152, 162, 3P & 182 only)
11- 200A Rapid Connector (3P only)
12- Front Wheels (162, 3P & 182 only)
13- Fixed Power Cable (142, 162, & 182 only)
14- Case protected against polarity reversal (142, 152, 162 & 182 only)
15- Fastening chain for bottles. Warning: fasten the bottles correctly.
SEMI-AUTOMATIC WELDING FOR STEEL / STAINLESS STEEL (MAG MODE) (FIG-II)
These machines can weld Steel and Stainless Steel wires of 0.6/0.8 or 1.0mm (except SMARTMIG 142/152) (Fig II - A)
The Smartmig 3P can weld steel and stainless steel wire (0.6/0.8 or 1.0 diameter), to do so please connect the earth cable on the negative terminal
at the front of the machine (g I). The machine is delivered equipped to function with Ø 0.8mm Steel/Stainless steel wire, and the contact tip, roller
throat and the sleeve of the torch supplied are suitable for this application.
Should you wish to use 0.6mm wire, you will need to change the contact tip. The wire reel is reversable (0.6 / 0.8mm) and will need to be inserted
into the machine so that the gure 0.6 is visible. For welding with Ø 1.0mm wire, you will need to use a specic roller and contact tip.
For welding with Steel or Stainless Steel it is necessary to use
For use with Steel/Stainless Steel, the gas requirement is Argon + CO2. (Ar+CO2).. The proportion of CO2 required will vary depending on the
use. For specic gas requirements, please contact your gas distributor. The gas ow in steel is between 12 and 18 Litres/minute depending on the
environment and experience of the welder.

Chatta con il manuale del tuo GYS Smartmig 162 utilizzando l'IA

Ottieni risposte istantanee dall'IA dal manuale del tuo GYS Smartmig 162

Chiedi qualsiasi cosa sul GYS Smartmig 162. Le risposte provengono da questo manuale, con le pagine di riferimento.

Smartmig 162 Programma di manutenzione

Ricordami quando e' necessaria la manutenzione
Ogni 4 mesi
Rimuovere il telaio e pulire la polvere interna

Rimuovere il coperchio 2 o 3 volte l'anno usando aria compressa. Controllare le connessioni elettriche con uno strumento isolato da personale qualificato.

Mostra nel manuale (pagina 12)
Annuale
Eseguire controllo di manutenzione annuale

La manutenzione annuale è raccomandata e deve essere eseguita solo da una persona qualificata.

Mostra nel manuale (pagina 12)
Regolarmente
Controllare lo stato del cavo di alimentazione

Ispezionare regolarmente il cavo di alimentazione. Sostituirlo se danneggiato dal produttore o da un servizio qualificato per evitare pericoli.

Mostra nel manuale (pagina 12)

Promemoria di manutenzione gratuiti

In base alla data di acquisto. Sempre gratuito, annulla l'iscrizione in qualsiasi momento.

Inviando, accetti l'informativa sulla privacy. Puoi annullare l'iscrizione con un clic in qualsiasi email.
M: QW-35-FL

Fai una Domanda

0/1000

Consigli Smartmig 162?

Sì No
0
User Pic

Dirk M.

10 mesi fa

I heard some buyers received the welder with light transport damage. How well is it packaged, and what should I do if it arrives bent or damaged?

0
User Pic

Manual.ly

10 mesi fa

The welder is usually shipped well protected, but if you notice any transport damage on arrival (for example a bent part, damaged torch, or a defective connection), please stop using the unit. Take clear photos of the packaging and the affected parts, then contact our support or the seller as soon as possible. We can advise on the next step, typically inspection and arranging a replacement or return within the applicable return/warranty timeframe. To avoid delays, keep all original packaging and documentation, and describe the damage and what you tested (if anything).

M: OA-GPT-5-NAN
M: OA-GPT-5-NAN

Domande frequenti

A

Serve principalmente per la saldatura semiautomatica MIG/MAG su acciaio e acciaio inox, con la possibilità di usare il filo animato in modalità senza gas dopo aver cambiato la polarità.

Questa risposta è utile?

A

Sì, è relativamente adatta ai principianti perché la tabella intelligente aiuta ad abbinare velocità del filo e tensione allo spessore del materiale. Per ottenere i risultati migliori è comunque utile una conoscenza base della saldatura.

Questa risposta è utile?

A

Sì. Può funzionare con filo animato senza gas se la polarità viene invertita correttamente. Questo la rende utile per lavori all'aperto o riparazioni semplici.

Questa risposta è utile?

A

Sì, ma la saldatura dell'alluminio richiede la configurazione corretta: argon puro, filo adatto, guaina in teflon, la punta di contatto giusta e rulli di traino compatibili.

Questa risposta è utile?

A

La Smartmig 162 è progettata per un'alimentazione monofase a 230V con corretta messa a terra. La protezione del circuito deve corrispondere al fabbisogno di corrente della macchina.

Questa risposta è utile?

A

Probabilmente la macchina si è surriscaldata a causa di un uso intenso. Lasciarla raffreddare per alcuni minuti, mantenerla collegata per il raffreddamento della ventola e riprendere quando l'avviso scompare.

Questa risposta è utile?

A

Pulire regolarmente la polvere dall'interno, controllare cavo e connessioni, mantenere libere le aperture di ventilazione e far eseguire controlli periodici da personale qualificato.

Questa risposta è utile?

M: OA-GPT-54-NAN

Vantaggi e Svantaggi

Vantaggi

  • Le impostazioni intelligenti rendono più rapida e intuitiva la configurazione di tensione e velocità del filo.
  • Supporta lavori di saldatura versatili con MIG/MAG a gas e opzioni con filo animato senza gas.
  • Il design compatto e portatile è adatto all'uso in officina e agli spostamenti frequenti.
  • La protezione termica e i comandi chiari aiutano a migliorare la sicurezza e la stabilità operativa.
VS

Svantaggi

  • I cambi di materiale possono richiedere componenti aggiuntivi come rulli, punte o guaine.
  • Le migliori prestazioni dipendono dal gas corretto, dalla polarità giusta e dalla conoscenza della configurazione.
  • La progettazione EMC di classe A è più adatta ad ambienti industriali che residenziali.
  • L'uso intenso può attivare lo spegnimento termico e interrompere il lavoro fino al completamento del raffreddamento.
M: OA-GPT-54-NAN

Prodotto Specifiche

Potenza

6 kW (230V)

Tensione a vuoto

70 A

Campo di regolazione

30-160 A (MIG/MAG)

Dimensioni

540 x 450 x 330 mm (HxWxD)

Peso

25,00 kg

M: GO-GEM-FL-25

Descrizione del prodotto Descrizione

GYS Smartmig 162: una saldatrice MIG/MAG compatta con controllo intelligente

Il Manuale della saldatrice GYS Smartmig 162 MIG/MAG a gas di protezione evidenzia una macchina progettata per rendere la saldatura semiautomatica più accessibile senza rinunciare alle prestazioni. Realizzata per lavorazioni su acciaio e acciaio inox, questa saldatrice è pensata per utenti che desiderano un controllo pulito dell'arco, opzioni di configurazione flessibili e risultati affidabili in officina o in ambito professionale.

Saldatura pratica per il lavoro di ogni giorno

Uno dei punti di forza dello Smartmig 162 è la sua versatilità. È adatto alla saldatura MIG/MAG con gas di protezione e può anche essere adattato al filo animato senza gas invertendo la polarità. Con la configurazione corretta, gestisce diversi diametri di filo e supporta comuni lavori di lavorazione dei metalli su lamiera sottile, riparazioni e fabbricazioni generali. La tabella delle impostazioni intelligenti della macchina aiuta a scegliere tensione e velocità del filo, facendo risparmiare tempo e riducendo i tentativi.

Facile da configurare, ancora più facile da usare

Il concetto Smartmig si basa sulla semplificazione del controllo. Invece di richiedere da subito regolazioni tecniche approfondite, la macchina offre un riferimento chiaro per abbinare lo spessore del materiale alle impostazioni di saldatura. Questo la rende una scelta utile per operatori che necessitano di efficienza, ma vogliono comunque spazio per affinare l'arco in base a suono e sensazione. La disposizione del pannello frontale, il sistema di avanzamento del filo e il collegamento rapido del gas supportano tutti un flusso di lavoro più fluido.

Progettata pensando a sicurezza e affidabilità

Come ogni serio strumento di saldatura, questo modello mette la sicurezza al primo posto. La protezione termica aiuta a prevenire il sovraccarico durante un uso intenso, mentre il design dell'involucro e della ventilazione è pensato per garantire un funzionamento stabile. Il manuale sottolinea anche l'importanza di una corretta messa a terra, della ventilazione, di una gestione adeguata del gas e della manutenzione regolare. Questi dettagli contano perché la saldatura non consiste solo nell'unire metalli: significa farlo in modo sicuro, coerente e controllato.

Una buona soluzione per esigenze miste di officina

Per gli utenti che lavorano con acciaio, acciaio inox e applicazioni occasionali senza gas, lo Smartmig 162 offre un equilibrio tra praticità e capacità. È particolarmente interessante per chi apprezza indicazioni chiare, una configurazione gestibile e una macchina compatta che resta comunque abbastanza seria per attività regolari di produzione o riparazione.

Note

  • Usare il filo, il gas e la punta di contatto corretti per ciascun materiale.
  • Mantenere una buona ventilazione e lavorare in un'area pulita e asciutta.
  • Lasciare raffreddare la macchina dopo cicli di saldatura intensi.
  • La pulizia regolare e il controllo dei cavi aiutano a mantenere le prestazioni.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly