Manual.ly Logo

eufy RoboVac L70 Hybrid Manuale

0,0 · 0 Valutazioni

Manuale PDF · 128 Pagine

Italiano

M: QW-35-FL
pagina

/ 128

Loading...
fd1804a45c9f7f1f658c16c4528313ae7ee4 page f
26 27
English English
6. Empty any remaining water from the water tank. Clean the mopping cloth to avoid it
being mildewed and producing unpleasant smell.
24h
• It is recommended to clean the mopping cloth after mopping each time.
• Remove the mopping module when RoboVac is under charging or not in use.
Use Your RoboVac with Amazon Alexa / the Google
Assistant
Amazon Alexa or the Google Assistant is a smart voice control device that enables you to
control RoboVac with your voice.
Before you start, make sure that:
• RoboVac is attached to the Charging Base to ensure there is enough power.
• RoboVac is connected with the EufyHome app.
• You have an Alexa-enabled device (i.e. Amazon Echo, Echo Dot and Amazon Tap, Echo
Show, Echo Spot) or a device enabled with the Google Assistant (i.e. Google Home,
Google Home Mini). These devices are sold separately.
• The Amazon Alexa app or Google Home app is already installed on your smart device,
and you have created an account.
To control RoboVac with Amazon Alexa or the Google
Assistant
1. Open the EufyHome app and tap “Smart integrations” in the top left.
2. Follow the on-screen instructions to complete the setup.
- Currently this feature only supports English, German, French, and Spanish.
You can check regularly if more languages are supported at
https://www.eufylife.com/support/.
Set Up Physical / Virtual Barriers
Boundary Strips (Sold Separately)
Physical barriers including boundary strips can keep RoboVac away from cleaning certain
areas. RoboVac will recognize the barriers and will not cross into the blocked-off area.
1. Identify the area or item you do not want RoboVac to get close to.
2. Place the boundary strips FLAT on the floor or under an area rug.
• Make sure the boundary strips are placed on the same surface plane RoboVac
is used on.
• If the boundary strips are rolled up, remove and then re-apply on the floor with
adhesive tape. Otherwise the boundary strips may not work well.
Virtual Boundary (Available on the App Only)
In the EufyHome app, you can set up a “No-Go Zone” or “No-Mop Zone” as a restricted
area. This eliminates the need to use physical barriers, including Boundary Strips. This
feature is designed for dividing the cleaning zones, not for isolating hazardous areas.
• No-Go Zone: RoboVac will not enter the zone to vacuum or mop.
• No-Mop Zone: RoboVac will not enter the zone to mop, while vacuuming is still allowed.
• To set a virtual boundary, RoboVac must initially perform a cleaning run to
create a floor plan.
• To clean your home with virtual boundary, ensure that RoboVac is on the
Charging Base and that the Base has not been manually moved during
cleaning.
• Although a virtual boundary is set, RoboVac may still enter the restricted zone
due to such reasons as relocalization, wrong positioning or abnormal sensors.
• Moving the device or changing the environment may cause mapping failed
and rebuilt with virtual boundary lost.

Chatta con il manuale del tuo eufy RoboVac L70 Hybrid utilizzando l'IA

Ottieni risposte istantanee dall'IA dal manuale del tuo eufy RoboVac L70 Hybrid

Chiedi qualsiasi cosa sul eufy RoboVac L70 Hybrid. Le risposte provengono da questo manuale, con le pagine di riferimento.

RoboVac L70 Hybrid Programma di manutenzione

Ricordami quando e' necessaria la manutenzione
Settimanale
Pulire il filtro

Rimuovere il prefiltro, il filtro in schiuma e il filtro ad alte prestazioni. Pulire con aspirapolvere/spazzola o lavare per una pulizia profonda.

Mostra nel manuale (pagina 16)
Settimanale
Pulire la spazzola rotante

Sbloccare la protezione della spazzola, rimuovere la spazzola rotante e pulirla con un utensile o un aspirapolvere per eliminare peli e detriti.

Mostra nel manuale (pagina 16)
Mensile
Pulire la spazzola laterale

Svitare la spazzola laterale, districare i capelli/fili aggrovigliati e pulire la polvere con un panno umido. Assicurarsi che sia asciutta prima del riutilizzo.

Mostra nel manuale (pagina 16)
Mensile
Pulire i sensori e i pin di ricarica

Spolverare i sensori anticaduta e i pin di contatto di ricarica utilizzando un panno asciutto o una spazzola per la pulizia per mantenere le prestazioni.

Mostra nel manuale (pagina 16)
Mensile
Pulire la ruota girevole

Estrarre la ruota, rimuovere i capelli/debris aggrovigliati dall'asse e dalla cavità, e reinstallarla finché non scatta. Non usare acqua.

Mostra nel manuale (pagina 16)
Mensile
Pulire il modulo di mocio

Rimuovere il panno per il mocio, lavarlo con acqua e lasciarlo asciugare completamente all'aria per prevenire muffa e cattivi odori.

Mostra nel manuale (pagina 16)
Ogni 3-6 mesi
Sostituire la spazzola laterale

Sostituire le spazzole laterali ogni 3-6 mesi o quando sono visibilmente usurate, piegate o danneggiate.

Mostra nel manuale (pagina 16)
Ogni 3-6 mesi
Sostituire il panno per il mocio

Sostituire il panno per il mocio ogni 3-6 mesi o quando mostra segni visibili di usura.

Mostra nel manuale (pagina 16)
Ogni 6 mesi
Sostituire il filtro

Sostituire l'assembly del filtro ogni 6 mesi per mantenere la potenza di aspirazione ottimale e l'efficienza di filtrazione.

Mostra nel manuale (pagina 16)
Dopo ogni utilizzo
Pulire il contenitore della polvere e il serbatoio dell'acqua

Svuotare la polvere, sciacquare con acqua e lasciare asciugare completamente all'aria prima del prossimo utilizzo. Non usare acqua calda o detersivo.

Mostra nel manuale (pagina 16)
Dopo ogni utilizzo
Svuotare e pulire il serbatoio dell'acqua

Svuotare l'acqua residua dopo l'utilizzo del mocio. Sciacquare il serbatoio e assicurarsi che sia asciutto prima di riporlo per evitare la formazione di muffa.

Mostra nel manuale (pagina 15)
Ogni 6-12 mesi
Sostituire la spazzola rotante

Sostituire la spazzola rotante ogni 6-12 mesi a seconda dell'usura e della frequenza di utilizzo.

Mostra nel manuale (pagina 16)

Promemoria di manutenzione gratuiti

In base alla data di acquisto. Sempre gratuito, annulla l'iscrizione in qualsiasi momento.

Inviando, accetti l'informativa sulla privacy. Puoi annullare l'iscrizione con un clic in qualsiasi email.
M: qwen/qwen3.8-flash

Fai una Domanda

0/1000

Consigli RoboVac L70 Hybrid?

Sì No

Domande frequenti

A

You should clean the filters once every week and replace them every six months or when visibly worn. Regular maintenance ensures optimal suction power and prevents clogs in the air pathway during operation.

Questa risposta è utile?

A

Yes, you can control the robot using Amazon Alexa or the Google Assistant. You must first set up the integration through the EufyHome app and connect your smart speaker account to enable voice commands.

Questa risposta è utile?

A

The robot will automatically return to the charging base to recharge. Once it reaches 80 percent capacity, it will resume cleaning the remaining tasks to ensure the entire floor is cleaned without manual intervention.

Questa risposta è utile?

A

No, do not use the mopping module on carpets as it may damage the fabric or the robot. You should set a No-Mop zone in the app to prevent water from being released on carpeted areas during operation.

Questa risposta è utile?

A

Ensure your router supports the 2.4GHz band as the 5GHz band is not supported. Also check that your network password is correct and there are no strong firewalls blocking the connection to Eufy servers.

Questa risposta è utile?

A

Make sure the device is not on the charging base. Use a clip to press the Reset button on the unit. Then dock it or press the button to turn it on. This restores factory settings.

Questa risposta è utile?

A

The maximum suction power mode is called Max in the app settings. You can also select Quiet or Standard modes depending on your cleaning needs and floor type for optimal efficiency.

Questa risposta è utile?

M: QW-35-FL

Vantaggi e Svantaggi

Vantaggi

  • Real-time laser mapping for efficient cleaning paths
  • Hybrid vacuum and mop system for hard floors
  • BoostIQ technology increases suction on carpets automatically
  • Long battery life providing up to 150 minutes per charge
  • Smart app integration with virtual zones and schedules
VS

Svantaggi

  • Requires manual emptying of dust collector and filters
  • Not suitable for extremely thick high-pile carpets
  • Wi-Fi connection restricted to 2.4 GHz band only
  • Mopping module requires manual water tank filling
  • Charging pin sensors require regular cleaning to function correctly
M: QW-35-FL

Prodotto Specifiche

Aspirapolvere Robot

Batteria

14,4V, Li-Ion

Colore

Bianco

Capacità

450ml

Modalità di pulizia

Aspirazione, Aspirazione e Mocio

Navigazione

Sensore Laser, Zone, Zone No-Go, Rilevamento Tappeti

Filtrazione

Filtro Lavabile

Display

No

Funzionalità

1x Spazzola Principale, 1x Spazzola Laterale, Orari di pulizia Programmabili

Casa Intelligente

Controllo App (EufyLife), Assistente Vocale (Amazon Alexa, Google Assistant)

Autonomia

2,5h

Tempo di ricarica

5h

Sistema di ricarica

Automatico

Contenuto della confezione

Stazione, Accessorio Mocio

Stazione

Colore Stazione

Bianco, Nero

Display Stazione

No

Funzionalità Stazione

Funzione di ricarica automatica

M: QW-35-FL

Descrizione del prodotto Descrizione

Discover the eufy RoboVac L70 Hybrid Vacuum/Mop Robot Manual

Cleaning your home has never been easier with the eufy RoboVac L70 Hybrid Vacuum/Mop Robot Manual providing essential guides. This advanced robot combines vacuuming and mopping capabilities to tackle various floor types efficiently. The device features a sophisticated laser navigation system that maps your home in real-time. This ensures systematic cleaning paths rather than random patterns covering every inch of your floor space. Users will appreciate the ability to manage zones directly through the smartphone application interface.

Performance and Versatility

The RoboVac L70 uses BoostIQ technology. This feature automatically increases suction power when carpets or heavy debris are detected. It offers four suction modes ranging from quiet to max power settings. The device maintains a powerful cleaning standard while navigating around obstacles like furniture legs safely. Be sure to review the manual for specific setup instructions. The machine highlights that the robot should start each cleaning cycle from the charging base. This ensures accurate map relocalization if the surroundings change significantly during operation. The machine also returns to charge automatically when the battery is low.

Maintenance and Care

Regular maintenance is crucial for optimal performance over the long term. You should empty the dust collector after every use to prevent clogs. Filters require cleaning once a week. The side brushes and rolling brushes also need attention to prevent hair tangles. Hair can easily get caught in the side brush mechanism which stops rotation. Cleaning sensors and charging pins monthly helps avoid navigation errors. The water tank needs filling only for mopping tasks on hard floors. Do not use cleaning solutions other than water to prevent clogging the system. Always air dry components thoroughly before reuse to prevent mildew.

Smart Integration

Connectivity is seamless with compatible smart speakers like Alexa. You can control the device using Amazon Alexa or Google Assistant features. Setting up virtual barriers is possible via the app without physical strips. This adds flexibility to your daily cleaning routine significantly. The battery lasts up to 150 minutes on a single charge cycle. Charging takes approximately 240 to 300 minutes fully. Recharging automatically resumes cleaning at 80 percent capacity. Always ensure your router supports the 2.4GHz band for Wi-Fi connection. Following these guidelines ensures years of reliable service without issues.

Notes

Always remove power cords before cleaning to avoid accidents. Do not vacuum burning objects or wet spills like water or chemicals. Store the unit at room temperature only to protect the battery. The device is not suitable for extremely thick carpets but performs well on hard floors. Physical barriers are recommended near balconies or fireplaces. Red lights indicate errors found in the troubleshooting section. Voice alerts provide specific codes for problems. Reset the system if buttons do not respond. Keep the device away from wet areas during operation.

M: QW-35-FL

© Copyright 2026 Manual.ly