Manual.ly Logo

Caberg Duke Evo Manuale

0,0 · 0 Valutazioni

Manuale PDF · 16 Pagine

Italiano

M: qwen/qwen3.5-flash-20260224
pagina

/ 16

Loading...
35a96e1bdeb6640ae9f86251fd7d25bca917 page 6
ENG
Your helmet DUKE EVO thanks to the double homologation P/J can be used in 2 configurations
(chinguard closed “P” and chinguard open “J”)

When the P/J lever is positioned on “J” it is possible to block the chinguard in the open position
( Pic.1). The selection on the position “J” can be done before opening the chinguard.



When the lever P/J is positioned on “P” the chinguard can be opened and closed (Pic.2)
WARNING!
-
The level of protection of this helmet is in function of the configuration adopted by the user:
full protection with the chinguard closed and partial protection when the chinguard is open.
- 

1. HOW TO FIX AND REMOVE THE CLEAR VISOR
1.1 With the chin-guard closed, open the visor; push the release lever A towards the back of the
helmet and then release the visor (Pic. 3).
1.2 Repeat the same process on the other side and remove completely the visor.
To mount back the visor, repeat the above steps in reverse order.
2. INSTRUCTION TO REMOVE THE SMOKE SUN VISOR
2.1 Move the lever of the smoke sun visor towards the front of the helmet (Pic.4)
2.2 Release the smoke sun visor by lifting up, with a small flat screwdriver, the slider that holds it
to the lever (Pic.5)
2.3 Release the smoke sun visor by pulling slightly outwards (Pic.6)
3. INSTRUCTION TO ASSEMBLE THE SMOKE SUN VISOR
3.1 Clip the smoked visor accommodating its’ side parts into their seating with a slight pression.
(Pic.7)
3.2 Drive forward the top lever (Pic. 4)
3.3 Drive the smoke sun visor inside until it engages the lever (Pic.7)
WARNING: Never use the smoke sun visor during the night or with scarce visibility condition.
WARNING: Any adjustments to the smoke sun visor must be done with the two-wheeler in still
position.
4. REMOVING AND MOUNTING THE CHIN GUARD
The chin guard of this helmet can be removed to ease the cleaning of the various mechanisms.
4.1 Repeat steps 1.1.
4.2 Loosen the screw B (Pic. 8).
4.3 Remove the chin guard.
Repeat the above steps in the reverse order to mount the chinguard back to its original position.

6

Chatta con il manuale del tuo Caberg Duke Evo utilizzando l'IA

Ottieni risposte istantanee dall'IA dal manuale del tuo Caberg Duke Evo

Chiedi qualsiasi cosa sul Caberg Duke Evo. Le risposte provengono da questo manuale, con le pagine di riferimento.

Duke Evo Programma di manutenzione

Secondo necessità
Pulire la fodera interna lavabile

Lavare a mano con sapone neutro a max 30°C. Sciacquare con acqua fredda, non strizzare e asciugare a temperatura ambiente. Non usare mai lavatrici o solventi.

Mostra nel manuale (pagina 7)
Secondo necessità
Pulire i meccanismi del paracapo

Rimuovere il paracapo svitando il bullone B per facilitare la pulizia dei meccanismi interni. Rimontare nell'ordine inverso.

Mostra nel manuale (pagina 6)
M: qwen/qwen3.8-flash

Fai una Domanda

0/1000

Consigli Duke Evo?

Sì No

Domande frequenti

A

The P/J homologation allows the helmet to be used in two configurations. Position P keeps the chin bar closed for maximum protection, while position J locks the chin bar up for an open-face style without swapping the helmet. This flexibility adapts to different legal requirements and riding preferences.

Questa risposta è utile?

A

Yes, the inner liner is washable. You must remove the cheek pads and main liner, then wash by hand with neutral soap at a maximum of thirty degrees Celsius. Do not wring or use hot water, and never place it in a washing machine as it can damage the materials.

Questa risposta è utile?

A

To remove the smoke visor, move the lever to the front of the helmet. Release the visor by lifting the slider with a small flat screwdriver. Then, pull the visor slightly outward to release it from the sides before lifting it completely away from the shell.

Questa risposta è utile?

A

The installation requires attention to detail. Speakers go into the designated ear pockets with velcro pads. The microphone base goes under the cheek pad, and cables must be routed in the gap between the inner and outer shells. The keypad attaches to the left side using supplied adhesive.

Questa risposta è utile?

A

You must stop the bike before opening or closing the chin guard. Adjustments to the smoke sun visor must also be done while the vehicle is in a still position. This ensures safety and prevents mechanical issues with the locking mechanisms during use.

Questa risposta è utile?

A

The Stop Wind accessory is a wind deflector that limits the inflow of cold air from below. It installs by pressing a frame between the shell edge and the chin guard. It can be removed by pulling it upwards gently when not needed.

Questa risposta è utile?

A

Yes. The liner must be washed at a maximum of thirty degrees Celsius. Water should be cold for rinsing. Never use petrol, gasoline, or solvents for cleaning the liner. It should be dried at room temperature.

Questa risposta è utile?

M: qwen/qwen3.5-flash-20260224

Vantaggi e Svantaggi

Vantaggi

  • Dual P/J homologation provides versatile riding configurations for safety and open-face feel.
  • Washable inner liner ensures long-term hygiene and comfort during extended rides.
  • Compatible with communication kits like Just Speak Evo and Pro Speak Evo systems.
  • Smoke sun visor effectively reduces glare for sunny conditions on the road.
  • Removable chin guard simplifies cleaning of internal mechanisms and parts.
VS

Svantaggi

  • Vehicle must be stopped before adjusting chin guard or visors to prevent damage.
  • P position locks the chin guard closed preventing open-face modes while riding.
  • Sun visor cannot be used during night or low visibility for safety reasons.
  • Machine washing the liner is prohibited and can ruin the material integrity.
  • Communication system cable routing requires careful installation between shells.
M: qwen/qwen3.5-flash-20260224

Prodotto Specifiche

Tipo

Casco ribaltabile

Caratteristiche

Visiera parasole integrata

Peso

1,60 kg

M: qwen/qwen3.5-flash-20260224

Descrizione del prodotto Descrizione

Caberg Duke Evo Overview

The Caberg Duke Evo stands out as a versatile choice for riders seeking safety and comfort without compromising on style or functionality. This premium helmet features a dual homologation system, allowing drivers to switch between P and J configurations seamlessly. The P setting keeps the chin bar closed for maximum structural protection, while the J setting locks the chin bar up for an open-face feel without changing the helmet entirely. This flexibility ensures the rider adapts to different riding styles and legal requirements on the road safely.

Safety and Operation

Safety is paramount, and specific operational warnings must be followed for long-term use. Users must ensure the vehicle is stopped before adjusting the chin guard or visor mechanisms to prevent mechanical failure. This precaution ensures the helmet maintains its integrity during active riding conditions. The communication system fits comfortably inside. Installation involves placing speakers and wires carefully between the outer and inner shells. The keypad attaches easily to the left side of the helmet using provided adhesive strips.

Comfort and Maintenance

Hygiene matters for long rides and daily usage. The inner liner in the Caberg Duke Evo is washable, making maintenance simple and effective for riders. Users remove cheek pads and the main liner, washing by hand with neutral soap at exactly thirty degrees Celsius. Machine washing is strictly prohibited to preserve the fit and materials inside the shell. This attention to detail promotes a healthy riding experience over extended periods of time on the highway.

Accessories and Visors

Visibility is also managed well with a smoke sun visor option. This accessory clips between the shell and the main visor to reduce glare during sunny conditions. However, users should never use this tinted shield at night or in low visibility situations to avoid danger. Reversible visor systems and the Stop Wind accessory further enhance the riding environment by blocking drafts effectively from the front. Understanding the Caberg Duke Evo Manual is crucial for optimal operation and safety standards.

Final Thoughts

Ultimately, the product guides owners through these features to ensure longevity. Proper care and adherence to guidelines maximize both safety and enjoyment on two wheels. The robust construction supports the Caberg Pro Speak Evo or Just Speak Evo kits efficiently. Riders enjoy a premium experience knowing every component, from the stop wind deflector to the locking mechanisms, is designed for specific performance. Whether touring or commuting, this helmet delivers reliability and comfort for all road types and conditions faced by motorcyclists everywhere today. The manual details every step for installation of the communication components and visor changes specifically. Note that the P/J lever controls the lock position while driving for safety. Additionally, the chin guard can be removed for cleaning mechanisms. This allows access to the interior without fully stripping the helmet. It simplifies the process of keeping the helmet ready for the long road ahead.

Notes

Ensure the helmet is cooled before maintenance. Follow all local traffic laws regarding helmet usage.

M: qwen/qwen3.5-flash-20260224

© Copyright 2026 Manual.ly