Manual.ly Logo

Bosch DIY EasyDrill 1200 Manuale

0,0 · 0 Valutazioni

Manuale PDF · 215 Pagine

Italiano

M: OA-GPT-54-NAN
pagina

/ 215

Loading...
373598f794fee1c172941749f256260fbe1b page 11
English | 17
Operation
Starting Operation
Inserting the battery
Note: The use of batteries unsuitable for your power tool can
lead to malfunctions or damage to the power tool.
Set the rotational direction switch (6) to the middle position
to avoid unintentionally switching it on. Insert the charged
battery (8) into the handle until you feel it engage and it is
flush with the handle.
Setting the rotational direction (see figureC)
The rotational direction switch (6) is used to change the ro-
tational direction of the power tool. However, this is not pos-
sible while the on/off switch (10) is being pressed.
Right rotation: To drill and to drive in screws, press the ro-
tational direction switch (6) through to the left stop.
Left Rotation: To loosen and unscrew screws and nuts,
press the rotational direction switch (6) through to the right
stop.
Setting the Operating Mode
Drilling
EasyDrill 1200:
Set the torque presetting ring(3) to the
"drilling" symbol.
EasyImpact 1200:
Set the operating mode presetting ring(4) to
the "drilling" symbol.
Screwdriving
EasyDrill 1200:
Set the torque presetting ring(3) to the re-
quired torque.
EasyImpact 1200:
Set the operating mode presetting ring(4) to
the "screwdriving" symbol.
Set the torque presetting ring(3) to the re-
quired torque.
Impact drilling
EasyImpact 1200:
Set the operating mode presetting ring(4) to
the "impact drilling" symbol.
Preselecting the Torque
The torque presetting ring (3) can be used to preselect the
required torque in 20 stages. When the correct setting is
used, the application tool will be stopped when the screw is
driven flush into the material or once the set torque has been
reached. In position the overload clutch is deactivated,
e.g. for drilling.
When unscrewing screws, you can select a higher setting or
set the tool to the symbol.
Adjusting the Speed
You can adjust the speed of the power tool when it is on by
pressing in the on/off switch (10) to varying extents.
A light pressure on the on/off switch (10) results in a low ro-
tational speed. Increased pressure on the switch causes an
increase in speed.
Adjusting the Speed/Impact Rate (EasyImpact1200)
You can adjust the speed/impact rate of the power tool when
it is on by pressing in the on/off switch (10) to varying ex-
tents.
Applying light pressure to the on/off switch (10) results in a
low rotational speed/impact rate. Applying increasing pres-
sure to the switch increases the speed/impact rate.
Mechanical gear selection
u Only operate the gear selector (5) when the power
tool is not in use.
You can preselect two speed ranges with the gear selector
(5).
Gear I:
Low speed range; for screwdriving or working with a large
drilling diameter.
Gear II:
High speed range; for working with a small drilling diameter.
If the gear selector switch (5) cannot be pushed all the way,
turn the tool holder (1) with the application tool slightly.
Switching on/off
To start the power tool, press and hold the on/off switch
(10).
The lamp (11) lights up when the on/off switch (10) is lightly
or fully pressed, meaning that the work area is illuminated in
poor lighting conditions.
To switch off the power tool, release the on/off switch (10).
Fully automatic spindle lock (Auto-Lock)
The drill spindle, and therefore the tool holder(1), are
locked when the on/off switch (10) is not pressed.
This enables screws to be screwed in even when the battery
(8) is empty and allows the power tool to be used as a
screwdriver.
Run-out brake
Upon releasing the on/off switch (10), the drill chuck is
slowed down, which prevents the application tool from con-
tinuing to rotate.
When driving in screws, you should therefore only release
the on/off switch (10) once the screw has been inserted
flush into the workpiece. This way, the head of screw will not
penetrate the workpiece.
Temperature-dependent overload protection
In normal conditions of use, the power tool cannot be over-
loaded. In the event of heaving loading or the temperature
rising/falling outside the permitted battery temperature
range, the speed will be reduced. The power tool will not run
at full speed again until the permitted battery temperature
has been reached.
Bosch Power Tools 1 609 92A 7WD | (20.06.2022)

Chatta con il manuale del tuo Bosch DIY EasyDrill 1200 utilizzando l'IA

Ottieni risposte istantanee dall'IA dal manuale del tuo Bosch DIY EasyDrill 1200

Chiedi qualsiasi cosa sul Bosch DIY EasyDrill 1200. Le risposte provengono da questo manuale, con le pagine di riferimento.

EasyDrill 1200 Programma di manutenzione

Dopo un uso prolungato a bassa velocit
Raffreddare lo strumento

Far funzionare lo strumento alla massima velocit senza carico per circa 3 minuti per raffreddarlo dopo averlo usato a basse velocit per un periodo prolungato.

Mostra nel manuale (pagina 17)
Prima di ogni utilizzo o quando necessario
Controllare le parti mobili e le condizioni

Verificare che le parti mobili funzionino correttamente senza bloccarsi e che nessuna parte sia rotta o danneggiata prima dell'uso.

Mostra nel manuale (pagina 6)
Quando necessario
Pulire lo strumento e le fessure di ventilazione

Mantenere lo strumento elettrico e le fessure di ventilazione puliti per garantire un funzionamento sicuro ed efficiente.

Mostra nel manuale (pagina 10)
M: QW-35-FL

Fai una Domanda

0/1000

Consigli EasyDrill 1200?

Sì No

Domande frequenti

A

Este taladro inalámbrico está diseñado para taladrar madera, metal, cerámica y plástico. No está equipado para taladrado de impacto en mampostería como ladrillo o piedra.

Questa risposta è utile?

A

Localiza el interruptor de dirección de rotación en la parte superior del mango. Deslízalo completamente a la izquierda para rotación horaria (atornillando) o completamente a la derecha para rotación antihoraria (destornillando).

Questa risposta è utile?

A

Sí, seleccionando la configuración de torque apropiada en el anillo preestablecido. Para tornillos más grandes en materiales duros, se recomienda hacer un agujero piloto previo para evitar que se parta el material.

Questa risposta è utile?

A

El producto generalmente se envía con una batería de iones de litio parcialmente cargada. Se recomienda cargarla completamente antes del primer uso para asegurar un rendimiento máximo.

Questa risposta è utile?

A

El selector de marchas te permite elegir entre dos rangos de velocidad. La Marcha I es para baja velocidad y alta torsión, ideal para atornillar. La Marcha II es para alta velocidad, adecuada para taladrar agujeros pequeños.

Questa risposta è utile?

A

Las baterías Bosch generalmente vienen con un período de garantía específico. Por favor revisa el empaque o el sitio web oficial para la duración exacta aplicable a tu región.

Questa risposta è utile?

M: QW-35-FL

Vantaggi e Svantaggi

Vantaggi

  • Diseño ligero y ergonómico para un manejo cómodo
  • La caja de cambios de dos velocidades ofrece versatilidad para taladrar y atornillar
  • La luz LED integrada mejora la visibilidad en espacios oscuros
  • El portabrocas sin llave permite cambios rápidos y fáciles de puntas
  • La Protección Electrónica de Celdas evita la descarga profunda de la batería
VS

Svantaggi

  • No es adecuado para taladrado de mampostería pesado sin función de impacto
  • La capacidad de la batería puede ser insuficiente para trabajos continuos muy largos
  • El límite de torsión podría ser menor que los modelos de grado profesional
M: QW-35-FL

Prodotto Specifiche

Tipo

Cacciavite

M: QW-35-FL

Descrizione del prodotto Descrizione

Descubre el Poder de la Bosch DIY EasyDrill 1200

La Taladro Inalámbrico Bosch DIY EasyDrill 1200 se erige como un testimonio de ingeniería de precisión diseñada específicamente para entusiastas del bricolaje. Esta herramienta versátil combina fiabilidad con facilidad de uso, convirtiéndola en una adición esencial a cualquier kit de herramientas de bricolaje. Ya sea que estés montando muebles, colgando estantes o enfrentando reparaciones menores en la casa, este taladro ofrece un rendimiento constante sin las molestias de los cables.

En el corazón de su funcionamiento hay un sistema de batería robusto de iones de litio de 12 voltios. Esta fuente de energía asegura que la herramienta permanezca ligera y lo suficientemente potente para manejar una variedad de tareas. El diseño ergonómico cuenta con un agarre aislado que mejora la seguridad y comodidad del usuario durante periodos prolongados de trabajo. Una característica destacada es la PowerLight integrada, que ilumina el área de trabajo en rincones poco iluminados, asegurando precisión incluso en entornos desafiantes.

El EasyDrill 1200 ofrece dos velocidades, permitiendo a los usuarios cambiar entre baja torsión para aplicaciones de atornillado y alta velocidad para taladrar madera, metal, cerámica y plástico. El anillo de torque ajustable proporciona 20 configuraciones diferentes, dándote un control preciso sobre qué tan apretado se introduce un tornillo, evitando daños en los materiales o cabezas deshilachadas. Además, el portabrocas sin llave permite cambios rápidos y sin herramientas de las puntas, optimizando significativamente tu flujo de trabajo.

La seguridad es primordial en el diseño de este dispositivo. Incluye un sistema de protección contra sobrecarga dependiente de la temperatura que reduce automáticamente la velocidad si el motor se calienta demasiado, protegiendo tanto la herramienta como el usuario. El bloqueo automático del husillo mantiene el portabrocas estacionario cuando se suelta el gatillo, haciendo los cambios de punta más seguros y fáciles. Con estas características pensadas, la guía manual Bosch DIY EasyDrill 1200 guía a los usuarios a través de una operación segura y eficiente cada vez.

Notas Importantes

  • Siempre retira la batería antes de cambiar accesorios.
  • Usa protección ocular adecuada al taladrar.
  • Asegúrate de que la pieza de trabajo esté firmemente sujetada antes de comenzar.
  • Usa solo cargadores recomendados para una vida óptima de la batería.

Pros

  • Diseño ligero y ergonómico para un manejo cómodo.
  • La caja de cambios de dos velocidades ofrece versatilidad para taladrar y atornillar.
  • La luz LED integrada mejora la visibilidad en espacios oscuros.
  • El portabrocas sin llave permite cambios rápidos y fáciles de puntas.
  • La Protección Electrónica de Celdas evita la descarga profunda de la batería.

Contras

  • No es adecuado para taladrado de mampostería pesado sin función de impacto.
  • La capacidad de la batería puede ser insuficiente para trabajos continuos muy largos.
  • El límite de torsión podría ser menor que los modelos de grado profesional.
M: OA-GPT-54-NAN

© Copyright 2026 Manual.ly